环状土工管袋承压特性与承压强度计算OA
Bearing characteristics and calculation method for bearing strength of annular geotubes
针对疏浚淤泥处置中传统条状土工管袋坝蓄淤结构稳定性不高、依赖天然或人工沟谷和洼地以及土地利用率低等问题,提出了一种由内部充填砂的环状土工管袋组成的新型蓄淤围坝结构.该围坝结构设计及稳定性分析涉及的关键科学问题是环状管袋的承压特性及承压强度计算方法.基于自主研制的大型承压试验装置,开展了多层环状管袋围坝模型承压试验,探明了砂-袋界面摩擦与管袋层间摩擦共同作用下管袋土工织物局部张力的分布规律.结果表明:(1)管袋承压区土工织物受管袋层间摩擦的抑制作用,自身张力发展受限,而管袋非承压区土工织物张力分布不均匀,局部最大张力位于承压区与非承压区的交界处;(2)土工织物自身模量对其平均张力的影响较小,但其极限张拉强度与管袋承压强度呈正相关关系;(3)管袋内砂的充填度通过改变管袋形态特征而影响管袋土工织物张力的发展趋势.基于试验得到的规律,建立了以局部最大张力作为破坏准则且考虑界面摩擦效应的环状土工管袋承压强度的计算方法,并借助离散元模型验证了计算方法的合理性.
In response to issues such as the low stability of traditional linear geotube embankments for dredged sludge containment,reliance on natural or artificial gullies/depressions,and low land utilization efficiency,this study proposes a novel impoundment structure composed of sand-filled annular geotubes.The pivotal scientific considerations in the design and stability analysis of this structure pertain to the pressure-bearing characteristics and strength of the annular geotubes.Utilizing a self-developed large-scale pressure test apparatus,pressure-bearing tests were conducted on a multi-layered annular geotube embankment model.The tests revealed the distribution of localized fabric tension under the combined effects of sand-fabric interface friction and inter-layer friction between the geotubes.Key findings are outlined as follows:(1)The geotextile in the pressure-bearing zone of the geotube is constrained by inter-layer friction,thereby restricting the development of its tension.Conversely,in the free zone,the geotextile tension is unevenly distributed,with the local maximum tension occurring at the interface between the pressure-bearing and free zones.(2)The modulus of the geotextile exerts minimal influence on its average tension;however,its ultimate tensile strength demonstrates a positive correlation with the pressure-bearing strength of the geotube.(3)The degree of sand fulfillment affects the development trend of geotextile tension by altering the morphological characteristics of the geotube.Based on these insights,a calculation method for determining the pressure-bearing strength of annular geotubes was developed,using the local maximum tension as the failure criterion and considering the effects of interface friction.The rationality of this method was validated through discrete element modeling.
邹维列;高皋;韩仲;来志强;樊科伟
武汉大学 土木建筑工程学院,湖北 武汉 430072武汉大学 土木建筑工程学院,湖北 武汉 430072武汉大学 土木建筑工程学院,湖北 武汉 430072黄河水利委员会 黄河水利科学研究院,河南 郑州 450003河海大学 土木与交通学院,江苏 南京 210098
建筑与水利
环状土工管袋承压试验承压强度张力分布离散元模拟
annular geotubesbearing capacity testingbearing capacitydistribution of tensiondiscrete element modeling
《岩土力学》 2026 (10)
3301-3311,11
湖北省重点研发计划(No.2023BCB112)国家自然科学基金(No.52479107,No.52378365,No.52379066)河南省优秀青年科学基金(No.232300421065). This work was supported by the Hubei Provincial Key Research and Development Program Project(2023BCB112),the National Natural Science Foundation of China(52479107,52378365,52379066)and the Henan Province Outstanding Youth Science Foundation(232300421065).
评论