一种变形翼机构构型综合及其可靠性优化OA
Research on the Configuration of a Morphing Wing Mechanism and Its Reliability Optimization
为探索变形翼机构构型综合方法,提出一种基于图论理论的变形翼机构构型综合方法.首先,基于图论法进行运动链及拓扑图的同构判别,得到变形翼机构的基本构型,并研究了变形翼结构尺寸与刚度、总变形量及质量的敏感性关系;其次,针对传统优化方法的不足,采用基于可靠性的变形翼结构优化设计方法,对变形翼结构进行优化设计.仿真分析结果表明,采用所提方法进行优化设计,不仅大大节省了计算时间,而且得到的优化结果精度更高.对比完成构型优化前后的变形翼结构,发现优化后的质量减少 19.09%,且结构总变形量与等效应力失效概率均满足工程可靠性要求.
In view of an exploration of the comprehensive method of morphing wing mechanism configuration,a comprehensive method of morphing wing mechanism configuration has thus been proposed based on graph theory.Firstly,based on graph theory,isomorphism discrimination of kinematic chains and topological graphs is carried out to obtain the basic configuration of the morphing wing mechanism,followed by a study on the sensitivity relationship between the structure size,stiffness,total deformation,and mass of the morphing wing structure.Secondly,in view of the shortcomings of the traditional optimization method,a reliability-based morphing wing structure optimization design method is adopted to optimize the morphing wing structure.The simulation analysis results show that the proposed method adopted for optimization design not only greatly saves computation time,but also obtains optimization results with higher accuracy.By comparing the morphing wing structures before and after configuration optimization,it is found that the optimized mass decreases by 19.09%,and the total deformation and equivalent stress failure probability of the structure meet the engineering reliability requirements.
刘人瑞;唐嘉昌;姚齐水;董鹏林;余江鸿
湖南工业大学 机械工程学院,湖南 株洲 412007||高性能滚动轴承技术湖南省工程研究中心,湖南 株洲 412007湖南工业大学 机械工程学院,湖南 株洲 412007||高性能滚动轴承技术湖南省工程研究中心,湖南 株洲 412007湖南工业大学 机械工程学院,湖南 株洲 412007||高性能滚动轴承技术湖南省工程研究中心,湖南 株洲 412007湖南工业大学 机械工程学院,湖南 株洲 412007||高性能滚动轴承技术湖南省工程研究中心,湖南 株洲 412007湖南工业大学 机械工程学院,湖南 株洲 412007||高性能滚动轴承技术湖南省工程研究中心,湖南 株洲 412007
航空航天
变形翼构型综合轻量化可靠性优化
morphing wingconfiguration synthesislightweightreliability optimization
《湖南工业大学学报》 2026 (5)
67-73,7
国家自然科学基金资助项目(U20B2028)国家自然科学青年基金资助项目(52505258)湖南省自然科学基金资助项目(2024JJ6203)
评论