首页|期刊导航|湖南工业大学学报|NPR防撞电池包底壳液冷系统散热性能分析及优化

NPR防撞电池包底壳液冷系统散热性能分析及优化OA

Heat Dissipation Performance Analysis and Optimization of Liquid Cooling System for NPR Anti-Collision Battery Pack Bottom Shell

中文摘要英文摘要

在内凹六边形负泊松比(NPR)底部抗撞防护结构的基础上,针对底盘一体式电池包(CTC)液冷系统的散热、均温及流阻性能进行了分析与优化.首先在 2C放电倍率、冷却液入口流速为 0.3 m/s和温度为 25℃的条件下,对比分析了 3 种液冷流道方案的系统散热性能和压降,并选定温差和压降最小的方案3 进行优化.提出在流道内增设扰流元结构,并基于第二代非支配排序遗传算法(NSGA-Ⅱ),以液冷系统的最高温度Tmax、最大温差ΔTmax以及流道压降ΔP作为目标函数,将扰流元宽度W、间距D以及冷却液流速v作为变量进行多目标优化.结果表明:当W=2.356 mm、D=48.468 mm、v=0.216 m/s时,液冷系统的综合性能最佳.优化后液冷系统的最高温度、最大温差和流道压降分别为 300.46 K、2.22 K和 6 376.77 Pa,流道压降较初始方案降低了约 38.3%,在保证散热性能的同时降低了系统能耗,为CTC型电池包热安全设计提供了理论参考.

Based on the concave hexagonal negative Poisson's ratio(NPR)bottom anti-collision protection structure,the heat dissipation,an analysis and optimization have been made of the heat dissipation,temperature equalization,and flow resistance performance of the chassis integrated battery pack(CTC)liquid cooling system.Firstly,under the conditions of 2C discharge rate,a comparison,as well as an analysis,is made of coolant inlet flow rate of 0.3 m/s,and ambient temperature of 25℃,and the system heat dissipation performance and pressure drop of three liquid cooling channel schemes,scheme 3 with the smallest temperature difference and pressure drop to be selected for optimization.A disturbance element structure is proposed in the flow channels,based on the second-generation non-dominated sorting genetic algorithm(NSGA-Ⅱ),with the maximum temperature Tmax,maximum temperature difference ΔTmax,and flow channel pressure drop ΔP of the liquid cooling system taken as the objective functions,and the disturbance element width W,spacing D,and coolant flow rate v used as variables for multi-objective optimization.The results indicate that the optimal performance of the liquid cooling system can be achieved when W=2.356 mm,D=48.468 mm,and v=0.216 m/s.After optimization,the maximum temperature,maximum temperature difference,and flow channel pressure drop of the liquid cooling system are 300.46 K,2.22 K,and 6 376.77 Pa,respectively.The flow channel pressure drop is reduced by about 38.3%compared to the initial scheme,which ensures heat dissipation performance as well as reduces system energy consumption,thus providing theoretical reference for the thermal safety design of CTC-type battery packs.

张勇;连钰轲;刘水长;蒋运波;晏宇枭

湖南工业大学 机械工程学院,湖南 株洲 412007湖南工业大学 机械工程学院,湖南 株洲 412007湖南工业大学 机械工程学院,湖南 株洲 412007湖南工业大学 机械工程学院,湖南 株洲 412007湖南工业大学 机械工程学院,湖南 株洲 412007

信息技术与安全科学

底盘一体式电池包液冷系统扰流元多目标优化

chassis-integrated battery packliquid cooling systemflow disturbance elementmulti-objective optimization

《湖南工业大学学报》 2026 (5)

50-58,9

国家自然科学基金资助项目(52372352)湖南省自然科学基金资助项目(2023JJ50192)海南省自然科学高层次人才基金资助项目(721RC547)

10.20271/j.cnki.1673-9833.2026.5007

评论