首页|期刊导航|噪声与振动控制|含槽型壳体结构的声学覆盖层吸声特性研究

含槽型壳体结构的声学覆盖层吸声特性研究OA

Sound Absorption Characteristics of Acoustic Covering Layer with a Grooved Shell Structure

中文摘要英文摘要

采用声学覆盖层是降低水下航行器探测风险的关键手段,对于保障水下航行器的安全性具有重要意义.然而,现有的声学覆盖层难以在吸声性能与承压能力之间实现良好的平衡.为此,基于传统空腔声学覆盖层设计一种金属支撑空腔的复合结构声学覆盖层,期望在提升吸声性能的同时增强其承压能力.基于有限元仿真软件建立声学覆盖层模型,并对其吸声性能进行分析,结果表明在600至10 000 Hz覆盖层平均吸声系数达到0.98,在静水压力为5 MPa条件下只产生较小的变形并仍然维持很好的吸声性能,且覆盖层密度仅为986.93 kg/m3.通过分析覆盖层位移云图,发现该结构保留了传统空腔覆盖层中的空腔谐振吸声等机制,加入壳体共振结构不仅可提高结构稳定性,同时还可扩展覆盖层的工作频率范围.

Acoustic coating is a key means for underwater vehicles to reduce detection risks and is of great significance for ensuring the safety of underwater vehicles.However,existing acoustic coatings are difficult to achieve a good balance between sound absorption performance and pressure bearing capacity.Therefore,this article designs a composite structure of acoustic cover layer with a metal supported cavity based on the traditional cavity acoustic cover layer design,so as to improve its sound absorption performance while enhance its pressure bearing capacity.An acoustic cover layer model was established based on finite element simulation software,and its sound absorption performance was analyzed.The results showed that the average sound absorption coefficient of the cover layer reaches 0.98 in the frequency range of 600-10 000 Hz,and only small deformation is generated while high acoustic performance was maintained under a static water pressure of 5 MPa.The cover layer density was only 986.93 kg/m3.Through the analysis of the displacement cloud map of the covering layer,it was found that the structure retains the mechanisms of cavity resonance in the traditional cavity covering layer,Adding the shell resonance structure improves the stability of the structure meanwhile widens the working frequency of the covering layer.

符胜俊;唐世灏;陶猛

贵州大学 机械工程学院,贵阳 550025贵州大学 机械工程学院,贵阳 550025贵州大学 机械工程学院,贵阳 550025

数理科学

声学吸声覆盖层金属支撑结构低密度结构水下宽频吸声耐压设计

acousticssound-absorbing cover layermetal support structurelow-density structureunderwater broadband sound-absorbingpressure resistant design

《噪声与振动控制》 2026 (5)

50-56,7

国家自然科学基金(52265010)

10.3969/j.issn.1006-1355.2026.05.008

评论