首页|期刊导航|燕山大学学报|可控气氛等离子喷涂技术研究进展

可控气氛等离子喷涂技术研究进展OA

Research progress in controlled atmosphere plasma spraying technologies

中文摘要英文摘要

可控气氛等离子喷涂通过在可控环境压力和气氛中构建高比焓、高动量通量等离子射流,可显著抑制粒子飞行氧化与氧化夹杂形成,是制备高致密度、高纯度和高结合强度涂层的重要技术路径.基于此,总结了低压/可控气氛条件下的跨尺度物理过程,系统综述了相关研究进展,重点聚焦三条主线:等离子射流的温度场、速度场及压缩-膨胀结构特征;粉末粒子在射流中的传热、传质与动量交换行为;粒子撞击后的铺展和凝固、片层组织演化以及孔隙与残余应力形成机制.低压环境下射流强膨胀及其伴随的局部热力学非平衡会显著重构热量与动量传递边界,使粒子加热、熔化、蒸发与加速过程对功率、腔压和气体体系等工艺变量高度敏感;在沉积阶段,界面润湿与真实接触、铺展和凝固时间尺度竞争以及多熔滴搭接、再加热行为共同决定片层组织、孔隙结构与应力状态的协同演化.进一步地,本文讨论了多粒子连续沉积条件下孔隙形成、应力积累及组织致密化之间的内在联系.最后,从物理机制与过程调控耦合的角度,提出可控气氛等离子喷涂实现高致密度、高一致性的涂层仍需重点突破多尺度状态参量表征、机理驱动建模及闭环控制等关键问题.

Controlled Atmosphere Plasma Spraying(CAPS)constructs plasma jets with high specific enthalpy and high momentum flux under controlled-pressure atmospheres,which can markedly suppress in-flight particle oxidation and the formation of oxide inclusions,and thus provides an important route for the fabrication of coatings with high density,high purity,and high interfacial bonding strength.In this paper,the research progress on the multiscale physical processes involved under low-pressure/controlled-atmosphere conditions is systematically reviewed,with emphasis on three main themes:the temperature and velocity fields of plasma jets and their compressible expansion characteristics;heat,mass,and momentum transfer of powder particles within the plasma jet;and the spreading-solidification behavior after particle impact,lamellar microstructural evolution,and the formation mechanisms of pores and residual stresses.Under low-pressure conditions,the strong expansion of the plasma jet,together with the accompanying non-equilibrium and rarefaction effects,significantly alters the boundary conditions for heat and momentum transfer,making particle heating,melting,evaporation,and acceleration highly sensitive to process variables such as power,chamber pressure,and gas composition.During deposition,interfacial wetting and real contact,the competition between spreading and solidification timescales,and successive droplet impingement and reheating collectively govern the coupled evolution of lamellar microstructure,pore structure,and stress state.Furthermore,the intrinsic relationship among pore formation,stress accumulation,and microstructural densification under continuous multiparticle deposition is discussed.Finally,from the perspective of coupling physical mechanisms with process regulation,it is proposed that achieving highly dense and highly consistent coatings by CAPS still requires major advances in multiscale state-parameter characterization,mechanism-driven modeling,and closed-loop control.

高健伟;吴朝峰;黄兆晖;祝海涛;王强;王波;汪殿龙

燕山大学 机械工程学院,河北 秦皇岛 066004燕山大学 机械工程学院,河北 秦皇岛 066004北京飞机维修工程有限公司,北京 100621燕山大学 机械工程学院,河北 秦皇岛 066004燕山大学 机械工程学院,河北 秦皇岛 066004燕山大学 机械工程学院,河北 秦皇岛 066004燕山大学 机械工程学院,河北 秦皇岛 066004

矿业与冶金

可控气氛等离子喷涂等离子射流特性粒子加热与动量传递过程熔滴铺展与凝固动力学孔隙结构调控残余应力分布

controlled atmosphere plasma sprayingplasma jet characteristicsparticle heating and momentum transferdroplet spreading and solidification dynamicspore structure controlresidual stress distribution

《燕山大学学报》 2026 (5)

377-394,18

国家科技重大专项资助项目(2025A060)

10.3969/j.issn.1007-791X.2026.05.001

评论