首页|期刊导航|太赫兹科学与电子信息学报|基于三模谐振器的三路可重构滤波功分器设计

基于三模谐振器的三路可重构滤波功分器设计OA

Design of a tri-mode resonator-based reconfigurable three-way filtering power divider

中文摘要英文摘要

提出一种具有任意工作通道、中心频率可调谐的三路可重构滤波功分器.该滤波功分器采用加载变容二极管的三模谐振器形成滤波响应,通过调节变容二极管实现中心频率的调谐;通过控制加载在3条支路上的PIN二极管控制支路的导通与截止,实现工作通道在单通道、双通道及三通道之间灵活切换,达成全重构效果.仿真结果表明,三路可重构滤波功分器的中心频率在3种工作通道状态下,均能实现1.7~2.2 GHz之间可调,在整个通带内,输入端口的回波损耗大于20 dB,插入损耗小于2 dB.

A three-way reconfigurable filtering power divider with arbitrary operating channels and tunable center frequency is proposed.The filtering power divider employs a tri-mode resonator loaded with varactor diodes to form the filtering response,and the center frequency is tuned by adjusting the varactor diodes.The operating channels are flexibly switched among single-channel,dual-channel,and triple-channel modes by controlling the PIN diodes loaded on the three branches to turn the branches on and off,achieving full reconfigurability.The simulation results show that the center frequency of the three-way reconfigurable filtering power divider is tunable from 1.7 to 2.2 GHz under all three operating channel states.Throughout the entire passband,the return loss at the input port is better than 20 dB,and the insertion loss is less than 2 dB.

张杏丹;田杰;刘艳群;唐万春

南京师范大学 中北学院,江苏 镇江 212300||南京师范大学 电气与自动化工程学院,江苏 南京 210023南京师范大学 电气与自动化工程学院,江苏 南京 210023南京师范大学 电气与自动化工程学院,江苏 南京 210023南京师范大学 电气与自动化工程学院,江苏 南京 210023

信息技术与安全科学

三路滤波功分器三模谐振器全重构

three-way filtering power dividertri-mode resonatorfully reconfigurable

《太赫兹科学与电子信息学报》 2026 (9)

988-990,1004,4

10.11805/TKYDA2025387

评论