首页|期刊导航|太赫兹科学与电子信息学报|大角度吸收和RCS缩减的薄型吸收体设计

大角度吸收和RCS缩减的薄型吸收体设计OA

Thin absorber design with large incident angle absorption and RCS reduction

中文摘要英文摘要

为实现机载设备对电磁波的宽带吸收,提出一种三明治结构的吸收体设计方案.该吸收体由3层结构组成:顶层为用于相位补偿的介质基板,中间层为损耗层介质基板,其表面刻蚀有氧化铟锡(ITO)导电薄膜制成的方形环和十字形图案,底层为带有金属反射作用的介质基板.基于相位补偿和多谐振原理,该吸收体实现了70°大入射角度吸收,且吸收带宽大于10 GHz.实验结果表明,在70°斜入射条件下,吸收体在9.5~20.1 GHz频段内的吸收率超过80%,雷达散射截面(RCS)缩减量大于6 dB.此外,在共形条件下,该吸收体性能稳定,显著增强了机载设备的隐身能力.

To achieve broadband absorption of electromagnetic waves for airborne equipment,a sandwich-structured absorber design is proposed.The absorber consists of three layers:the top layer is a dielectric substrate for phase compensation,the middle layer is a lossy dielectric substrate with indium tin oxide(ITO)conductive film etched into square-ring and cross-shaped patterns on its surface,and the bottom layer is a dielectric substrate with a metal reflective backing.Based on the principles of phase compensation and multi-resonance,the absorber achieves absorption at a large incidence angle of 70° with an absorption bandwidth exceeding 10 GHz.Experimental results demonstrate that under 70° oblique incidence conditions,the absorber achieves an absorption rate exceeding 80%in the frequency band of 9.5~20.1 GHz,with a Radar Cross Section(RCS)reduction greater than 6 dB.Furthermore,the absorber maintains stable performance under conformal conditions,significantly enhancing the stealth capability of airborne equipment.

马朝轶;张庭瑞;赵林飞;王蒙军;范超;郑宏兴

河北工业大学 电子信息工程学院,天津 300401河北工业大学 电子信息工程学院,天津 300401河北工业大学 电子信息工程学院,天津 300401河北工业大学 电子信息工程学院,天津 300401河北工业大学 电子信息工程学院,天津 300401河北工业大学 电子信息工程学院,天津 300401

信息技术与安全科学

大角度吸收雷达散射截面宽带吸收体

large angle absorptionRadar Cross Section(RCS)widebandabsorber

《太赫兹科学与电子信息学报》 2026 (9)

981-987,7

国家自然科学基金资助项目(62071166)石家庄市驻冀高校产学研合作项目(241130447A)

10.11805/TKYDA2025198

评论