首页|期刊导航|土木与环境工程学报(中英文)|蜂窝夹层板的频散特性与高频导波传播规律

蜂窝夹层板的频散特性与高频导波传播规律OA

Frequency dispersion characteristics and high-frequency guided wave propagation of honeycomb sandwich panels

中文摘要英文摘要

脱粘分层是蜂窝夹层板(HSP)最典型的损伤形式,对HSP结构的整体性和安全性影响很大,然而,监测信号对脱粘分层不敏感.为了解决HSP变形等效模型的波动性能适用性和脱粘分层识别时传感信号特征提取困难等问题,利用等效换算法将HSP换算为3层板状周期性结构,利用Comsol Multiphysics计算并绘制频散曲线;通过比对HSP等效和实际两种有限元分析结果,阐明导波在两种模型中波动性能的适用性;利用FE方法研究导波的"脱粘式分流"特征;采用模型试验验证HSP的频散特性和高频导波"脱粘式分流"特征的正确性.结果表明,当导波波长不超过HSP蜂窝芯单胞边长时,等效换算法和实体建模法得到的波动性能差异显著,脱粘分层是造成导波"脱粘式分流"的主要原因,建议采用高频导波激励的A0 模态时域响应作为特征识别HSP的脱粘分层.

Debonded delamination is a typical form of damage to honeycomb sandwich panels(HSPs),which can have a significant impact on the integrity and safety of HSP structures.However,monitoring signals are insensitive to the debonded delamination.In order to address the issues of the wave performance applicability of the deformation-based equivalent model for HSP structures and the difficulty in sensing signal feature extraction for debonded delamination identification,an equivalent conversion method is used by changing an HSP structure into a three-layered periodic structure,and the Comsol Multiphysics software is applied to calculate and draw frequency dispersion curves.The present study investigates the applicability of guided wave performance in the two models by comparing two kinds of finite element(FE)analysis results from the equivalent and actual models of the HSP structure.The FE method is employed to investigate the feature of the debonded-induced-split flow of guided waves.The model tests are used to validate the correctness of the frequency dispersion performance and the debonded-induced-split-flow feature of high-frequency guided waves.The findings indicate that the discrepancy in wave performance between the equivalent conversion and actual models is pronounced,given that the wavelength of the guided wave is less than a single cell height in the HSP.The debonded delamination is the main reason for the debonded-induced-split flow,and it is recommended that the time-domain sensing signals of high-frequency activated A0 mode guided waves are used as extracted features for the debonded delamination identification of HSP structures.

阎石;陈修坤;王雪南;孟庆一

沈阳建筑大学 土木工程学院,沈阳 110168沈阳建筑大学 土木工程学院,沈阳 110168沈阳建筑大学 土木工程学院,沈阳 110168沈阳建筑大学 土木工程学院,沈阳 110168

建筑与水利

蜂窝夹层板超声导波频散特性高频导波波动性能脱粘分层识别

honeycomb sandwich panels(HSPs)ultrasonic guided waves(UGWs)frequency dispersion characteristicshigh-frequency guided wavewave performancedebonded delamination identification

《土木与环境工程学报(中英文)》 2026 (5)

35-44,10

国家自然科学基金(51278313) National Natural Science Foundation of China(No.51278313)

10.11835/j.issn.2096-6717.2025.076

评论