数控加工中模具表面质量提升的工艺参数优化与仿真研究OA
Optimization of process parameters and simulation for enhancing mold surface quality in CNC machining
针对模具数控(CNC)加工中表面质量受多工艺参数耦合影响,难以精准调控的问题,开展了工艺参数优化与仿真研究.通过剖析各切削参数对表面粗糙度的影响,构建以切削速度、进给量、切削深度为决策变量的多目标优化模型,引入改进粒子群算法(IPSO)求解最优参数组合,结合有限元仿真预测切削力热分布,并通过正交实验验证优化效果.研究结果表明:优化后模具表面粗糙度由 1.2~2.4 μm 稳定降至 0.4~0.9 μm,平均降低 58.7%;表面粗糙度预测模型平均误差仅为 4.1%,最大相对误差控制在 8.3%以内;切削温度由 680℃降至 520℃,主切削力波动幅度减小约35%,加工稳定性显著提升.研究验证了所提方法在提升模具表面质量与加工效率方面的有效性,为模具制造企业提供了可量化的工艺参数决策依据.
In view of the problem that the surface quality in mold computer numerical control(CNC)machining is difficult to accurately regulate due to the coupling effect of multiple process parameters,this paper conducts research on process parameter optimization and simulation.By analyzing the mechanism of how cutting parameters affect surface roughness,a multi-objective optimization model with cutting speed,feed rate,and cutting depth as decision variables is constructed.The IPSO(improved particle swarm optimization)algorithm is introduced to solve for the optimal parameter combination.Finite element simulation is combined to predict the distribution of cutting force and heat,and the optimization effect is verified through orthogonal experiments.The research results show that:after optimization,the surface roughness of the mold is stably reduced from 1.2-2.4 μm to 0.4-0.9 μm,with an average reduction of 58.7%;the average error of the surface roughness prediction model is only 4.1%,and the maximum relative error is controlled within 8.3%;the cutting temperature is reduced from 680℃ to 520℃,the fluctuation range of the main cutting force is reduced by about 35%,and the machining stability is significantly improved.The research verifies the effectiveness of the proposed method in improving mold surface quality and machining efficiency,providing a quantifiable decision-making basis for process parameters for mold manufacturing enterprises.
郭长城
江海职业技术学院,江苏 扬州 225101
矿业与冶金
数控(CNC)加工模具表面质量工艺参数优化智能算法
computer numericalcontrol(CNC)machiningmold surface qualityprocess parameter optimizationintelligent algorithm
《模具技术》 2026 (4)
16-21,6
2025年江海职业技术学院科技创新团队:智能机电装备团队(编号:2026KJCX01).
评论