新能源汽车电机壳体模具成型过程数值模拟与工艺参数优化OA
Numerical simulation and process parameter optimization of mold forming process for motor housing of new energy vehicles
针对新能源汽车电机壳体高压压铸成型中存在的缩松、变形等缺陷问题,本文开展了成型过程数值模拟与工艺参数多目标优化研究.基于 ADC12 铝合金的材料特性及薄壁多筋结构特征,建立热-流-固耦合有限元模型,分析充型流动、凝固收缩与残余应力的演化.通过正交试验筛选浇注温度、模具温度和快压射速度等关键工艺参数,结合响应面法构建缺陷指数与变形量的代理模型,并引入 NSGA-II 算法进行多目标 Pareto 优化,实现成型质量与尺寸精度的协同调控.结果表明,优化后工艺使缩松体积占比由1.95%降至0.71%,端面最大变形量从0.51 mm减少至0.32 mm,气密合格率由 33%提升至 100%.小批量试制验证了数值模拟预测的准确性,误差率小于8%.研究表明,所提"模拟-评价-优化"闭环方法可有效提升电机壳体成型质量与工艺稳定性,为新能源汽车关键零部件的智能制造提供了理论依据与技术路径.
To address the defects such as shrinkage porosity and deformation in the high-pressure die casting process of motor housings for new energy vehicles,this paper investigates numerical simulation of the forming process and multi-objective optimization of process parameters.Based on the material characteristics of ADC12 aluminum alloy and the thin-walled,multi-rib structural features,a thermal-fluid-solid coupled finite element model is established to analyze the evolution of mold filling flow,solidification shrinkage,and residual stresses.Key process parameters,including pouring temperature,mold temperature,and high-speed injection velocity,are selected through orthogonal experimental design.A surrogate model for defect index and deformation is constructed using response surface methodology,and the NSGA-II algorithm is introduced for multi-objective Pareto optimization to achieve coordinated control of forming quality and dimensional accuracy.The results show that the optimized process reduces the shrinkage porosity volume fraction from 1.95%to 0.71%,decreases the maximum end-face deformation from 0.51 mm to 0.32 mm,and improves the air tightness pass rate from 33%to 100%.Small-batch trial production validates the accuracy of the numerical simulations,with an error of less than 8%.The study demonstrates that the proposed closed-loop method of"simulation-evaluation-optimization"can effectively enhance the forming quality and process stability of motor housings,providing a theoretical basis and technical pathway for the intelligent manufacturing of key components in new energy vehicles.
朱可宁;甘代伟
陕西国防工业职业技术学院,陕西 西安 710300陕西国防工业职业技术学院,陕西 西安 710300
矿业与冶金
电机壳体高压压铸数值模拟工艺优化缩松缺陷
motor housinghigh-pressure die castingnumerical simulationprocess optimizationshrinkage porosity defect
《模具技术》 2026 (4)
9-15,7
陕西国防工业职业技术学院2026年度校本科研计划项目"新能源汽车电机壳体模具成形过程数值模拟与工艺参数优化"(编号:Gfy26-06)陕西国防工业职业技术学院"金种子"青年教师项目(编号:JFZX2509)2023年度陕西省职业技术教育学会课题"产教融合背景下新能源汽车技术专业群建设的探索与实践"(编号:2023SZX042).
评论