基于BIM的岩土工程动态仿真关键技术研究OA
Research on Key Technologies of BIM-based Dynamic Simulation in Geotechnical Engineering
针对岩土工程钻孔数据有限且分布不均导致地质建模精度低,结构体构件繁杂、人机交互过多等问题,引入 Kriging空间插值算法,采用"点-面-体"建立多层连续地层拟合曲面;通过参数化逐级分解构件族库,实现 Revit快速建模.结果表明:Kriging插值算法与"点-面-体"建模可有效弥补离散钻孔数据不足,提升地质建模精度与效率;参数化构件族库显著减少人机交互操作,实现快速自动建模;地质-结构一体化模型可无损转换为数值仿真模型;以西安某基坑工程为例,所建耦合模型经有限元计算得土体最大位移 2.66 mm,满足安全施工要求,验证了该方法体系的实用性与有效性.
To address the low accuracy of geological modeling caused by limited and unevenly distributed borehole data in geotechnical engineering,as well as complicated structural components and excessive human-computer interaction,this research introduces the Kriging spatial interpolation algorithm and adopts the"point-surface-volume"modeling framework to establish multi-layer continuous stratum fitting surfaces.A parametric step-by-step decomposition method is used to construct a structural component family library,and rapid Revit modeling is realized.The results show that the Kriging interpolation algorithm and the"point-surface-volume"modeling strategy can effectively compensate for the deficiency of discrete borehole data and improve the accuracy and efficiency of geological modeling.The parametric component family library significantly reduces human-computer interaction operations and realizes rapid automatic modeling.The geological-structure integrated model can be converted into a numerical simulation model without data loss.Taking a foundation pit project in Xi'an as an example,the maximum soil displacement calculated by the finite element method for the established coupling model is 2.66 mm,which meets the safe construction requirements and verifies the practicability and effectiveness of the proposed method system.
闫西印;熊宽
中国公路工程咨询集团有限公司,北京 100089中国公路工程咨询集团有限公司,北京 100089
建筑与水利
岩土工程技术路线自动化创建空间插值融合集成动态仿真
geotechnical engineeringtechnical workflowautomated creationspatial interpolationfusion and integrationdynamic simulation
《路基工程》 2026 (5)
61-65,5
评论