高填方边坡分级退台式加筋格宾挡墙力学特性分析OA
Analysis of Mechanical Properties of Multi-stage Setback Reinforced Gabion Retaining Walls for High Fill Slopes
依托岳阳市某场坪项目边坡支护工程,运用 FLAC3D软件建立典型断面的数值模型,研究分级退台式加筋格宾挡墙的力学特性,包括柔性面墙位移,挡墙土压力分布,土工格栅应力分布和潜在滑裂面位置.结果表明:格宾面墙位移呈"单鼓型"分布,面墙在第一级挡墙的中部发生鼓凸,对于平台上方的二级挡墙,面墙位移随挡墙高度逐渐减小;挡墙墙内土压力呈现非线性分布,柔性挡墙允许面墙产生一定程度的位移,使得土压力得以充分释放;挡墙中的筋材拉应力沿筋材长度方向出现应力波峰,符合"网兜效应";将挡墙的潜在滑裂面与0.3H法滑裂面进行对比,挡墙的潜在滑裂面位置靠后.
Based on the slope support engineering of a field platform project in Yueyang City,a numerical model of a typical cross-section is established by FLAC3D software to investigate the mechanical properties of multi-stage setback reinforced gabion retaining walls,including the displacement of flexible facing wall,the earth pressure distribution inside retaining wall,the stress distribution of geogrids,and the location of potential slip surface.The results indicate that the displacement of the gabion facing wall present a"single bulging"distribution,with bulging deformation occurring in the middle of the first-stage retaining wall.For the second-stage retaining wall above the platform,the facing wall displacementdecreases gradually with the increase of wall height.The earth pressure inside the wall exhibits a nonlinear distribution.Flexible retaining walls allow a certain displacement of the facing wall,enabling the full release of earth pressure.The tensile stress of the reinforcement in the wall produces stress peaks along the length of the geogrids,which conforms to the"net bag effect".Compared with the slip surface determined by the 0.3H method,the potential slip surface of the retaining wall is located further backward.
何彬;涂家弘;陈烽;蒋胜广
岳阳市规划勘测设计院有限公司,湖南 岳阳 414004中南大学土木工程学院,长沙 410075岳阳市规划勘测设计院有限公司,湖南 岳阳 414004岳阳市规划勘测设计院有限公司,湖南 岳阳 414004
交通工程
格宾挡墙挡墙施工土工格栅中风化板岩地基位移发展潜在滑裂面
gabion retaining wallretaining wall constructiongeogridmoderately weathered slate foundationdisplacement developmentpotential slip surface
《路基工程》 2026 (5)
21-26,6
湖南省自然科学基金项目(2021JJ30830)
评论