基于ABAQUS的底部混凝土门式刚架结构节点稳定性数值模拟OA
Numerical Simulation of Joints Stability in Bottom-concrete Gantry Frame Structure Based on ABAQUS
针对底部混凝土门式刚架结构节点在复杂服役环境下稳定性分析中忽视 Q355 B 钢本构与损伤耦合、且单一荷载工况难以反映金属材料累积损伤效应的问题,从金属功能材料视角出发,构建基于ABAQUS 的精细化有限元模型,引入 Chaboche 混合硬化本构与延性损伤准则描述循环荷载下的滞回特性与韧性断裂行为,并分别开展行车、地震、风荷载及地震+行车振动组合工况的非线性动力时程分析,通过提取节点区应力-应变响应、安全系数演化及累积塑性应变等指标定量评估材料损伤进程.结果表明:7 度地震下节点最大应力为 242 MPa,安全系数下限为 1.2;行车荷载下最大应力为 258 MPa,最小稳定系数为13.8;60°风向角风荷载下最大应力为 247 MPa,各风向变形稳定;多源耦合荷载工况下节点最大应力升至278 MPa,累积塑性应变明显增大.该节点在各单独荷载工况下均满足稳定性设计要求,可为钢-混凝土组合结构节点设计中金属功能材料的选型与性能评估提供参考.
To address the issue that stability analyses of joints in bottom-concrete portal frame struc-tures under complex service conditions often neglect the coupling between the constitutive model and dam-age of Q355 B steel,and that single load cases fail to capture the cumulative damage effects in metallic ma-terials,a refined finite element model in ABAQUS was developed from the perspective of metallic function-al materials.The Chaboche mixed hardening constitutive model and a ductile damage criterion are incorpo-rated to characterize the hysteretic behavior and ductile fracture behavior under cyclic loading.Nonlinear dynamic time-history analyses are performed for multiple load scenarios,including traffic loading,seismic excitation,wind loading,and combined seismic-plus-traffic vibration.Quantitative assessments of materi-al damage progression are conducted by extracting joint-region stress – strain responses,safety factor e-volution,and cumulative plastic strain.The results indicate that under a seismic intensity of 7 degrees,the maximum joint stress is 242 MPa with a lower-bound safety factor of 1.2;under traffic loading,the maxi-mum stress is 258 MPa with a minimum stability coefficient of 13.8;under wind loads at a 60° incidence angle,the maximum stress was 247 MPa,and the deformation remained stable across all wind directions;and under multi-source coupled loading,the maximum joint stress rises to 278 MPa with a notable in-crease in cumulative plastic strain.This joint satisfies the stability design requirements under all individual load cases,providing a reference for the selection and performance evaluation of metallic functional materi-als in the joint design of steel-concrete composite structural structures.
王鑫;赵占伟;孙茂山;马咸安
中国轻工业武汉设计工程有限责任公司,湖北 武汉 430060陕西工业职业技术大学,陕西 咸阳 712000中国轻工业武汉设计工程有限责任公司,湖北 武汉 430060中国轻工业武汉设计工程有限责任公司,湖北 武汉 430060
建筑与水利
混凝土框架门式刚架结构稳定性分析数值模拟有限元模型
concrete framegantry frame structurestability analysisnumerical simulationfinite ele-ment model
《机械与电子》 2026 (9)
9-16,25,9
陕西省教育厅基金项目(23JK0309)
评论