首页|期刊导航|江西建材|全级配与湿筛二级配混凝土抗压抗拉及弹性模量试验研究

全级配与湿筛二级配混凝土抗压抗拉及弹性模量试验研究OA

Experimental Study on Compressive,Tensile and Elastic Modulus Properties of Fully-graded and Wet-screened Two-stage Graded Concrete

中文摘要英文摘要

为提高大坝工程的安全性和可靠性,文中制备了全级配与湿筛二级配的混凝土试件,通过抗压强度、抗拉强度和弹性模量试验,对比分析大坝用全级配与湿筛二级配混凝土的力学性能差异.结果表明,湿筛二级配混凝土在抗压和抗拉性能上优于全级配混凝土,具有更高的弹性模量;180 d 时,其抗压强度、抗拉强度和弹性模量为53.13、4.15、4.79×104 MPa,表现出较优的力学性能和变形性能,但全级配混凝土的后期性能增长更快;至180 d 时,两者性能差距明显缩小.

To enhance the safety and reliability of dam projects,this paper prepares concrete specimens with full gradation and wet-sieved secondary gradation,and conducts tests on compressive strength,tensile strength,and elastic modulus.It deeply studies the mechanical performance differences between full gradation and wet-sieved secondary gradation concrete used in dams.The results show that wet-sieved secondary gradation concrete outperforms full gradation concrete in compressive and tensile strength,and has a higher elastic modulus.At 180 days,the compressive strength,tensile strength,and elastic modulus of wet-sieved secondary gradation concrete are 53.13,4.15 and 4.79×104 MPa,indicating that it may provide better mechanical and deformation performance in the dam structure.However,it is also found that the later performance trend of full gradation concrete is better.At 180 days,the performance difference between the two mixtures was significantly reduced.

江桂林

黄河勘测规划设计研究院有限公司,河南 郑州 450003

建筑与水利

大坝用混凝土全级配湿筛二级配力学性能

Concrete for damsFull configurationWet sieve two-stage configurationMechanical properties

《江西建材》 2026 (7)

31-33,3

评论