首页|期刊导航|金属加工(热加工)|5052铝合金壳体激光自动焊接工艺技术研究

5052铝合金壳体激光自动焊接工艺技术研究OA

Research on the laser automatic welding process technology of the sheet metal shell of 5052 aluminum alloy

中文摘要英文摘要

以2mm厚5052铝合金壳体激光焊接为研究对象,从焊缝结构改进、拼焊搭接量调整、焊缝顺序优化等方面展开工艺研究,并对焊接接头的微观组织和力学性能进行了分析.结果表明:壳体拼焊搭接量为1mm时,错边的凸台结构有助于焊丝熔滴附着,使得焊缝表面成形饱满、圆滑且优化焊缝顺序可改善悬空对接焊缝结构的下塌问题.焊接接头的熔合线处和焊缝中心区存在细密的等轴晶组织,熔合线向焊缝中心过渡区域由柱状晶组成,得益于激光束的搅拌,接头整体微观组织得到细化.焊接接头各区域的硬度均低于母材,抗拉强度平均为197.4MPa,达到母材的87.2%,断后伸长率约5%,相较于母材其力学性能降低,激光对焊接接头的软化作用明显.

Taking the laser welding of 2mm thick 5052 aluminum alloy shell as the research object,process investigations were conducted from aspects of weld structure improvement,overlap adjustment,and welding sequence optimization,and the microstructure and mechanical properties of the welded joints were analyzed.The results show that when the shell overlap is 1mm,the convex boss structure facilitates filler metal droplet adhesion,resulting in full and smooth weld surface morphology,and optimizing the welding sequence can mitigate the sagging problem of unsupported butt welds.Fine equiaxed grains exist at both the fusion line and the weld center zone of the welded joint,while columnar grains are observed in the transition region from the fusion line toward the weld center.The overall microstructure of the joint is refined due to the stirring effect of the laser beam.The hardness in each zone of the welded joint is lower than that of the base metal.The average tensile strength is 197.4MPa,reaching 87.2%of the base metal,with an elongation after fracture of approximately 5%.Compared with the base metal,the mechanical properties of the welded joint decrease,indicating an obvious softening effect of laser welding on the welded joint.

陆凯雷;翟紫阳;杨涛;刘亮;孟佳;孟燕菲;邓礼兵

常州博瑞电力自动化设备有限公司 江苏常州 213000常州博瑞电力自动化设备有限公司 江苏常州 213000常州博瑞电力自动化设备有限公司 江苏常州 213000常州博瑞电力自动化设备有限公司 江苏常州 213000常州博瑞电力自动化设备有限公司 江苏常州 213000常州博瑞电力自动化设备有限公司 江苏常州 213000常州博瑞电力自动化设备有限公司 江苏常州 213000

5052铝合金激光焊接表面成形微观组织力学性能

5052 aluminum alloylaser weldingsurface formingmicrostructuremechanical properties

《金属加工(热加工)》 2026 (10)

62-67,6

评论