基于ProCAST的A356铝合金缸套金属型铸造工艺模拟与优化OA
Simulation and optimization of permanent mold casting process for A356 aluminum alloy cylinder liner based on ProCAST
针对压裂车用传统45钢缸套自重较大、轻量化需求迫切的问题,采用A356铝合金替代钢材,基于ProCAST有限元仿真平台,开展A356铝合金压裂车缸套金属型重力铸造工艺优化研究.对原始顶注式工艺的充型与凝固过程进行数值模拟,预测缩孔缩松内部缺陷的产生位置与分布规律并开展工艺优化.结果表明:原始顶注式工艺存在充型紊流剧烈、温度场分布不均匀、中部热节突出及补缩通道中断等问题,铸件关键区域易形成缩孔缩松,无法满足缸套服役要求.对浇注结构进行优化,并对优化后底注式工艺的充型与凝固进行数值模拟.结果表明:优化后底注式工艺充型平稳无飞溅,热节消除,补缩通道畅通,铸件本体缩孔缩松缺陷得到有效控制,致密度与内部质量得到提升.采用铝合金实现缸套轻量化,在低载荷工况下具备良好应用前景,可为铝合金同类长筒类铸件及压裂车零部件轻量化和缺陷控制提供可靠的数值模拟依据与参考.
Aiming at the heavy weight and urgent lightweight demand of traditional 45 steel cylinder liners used in fracturing trucks,A356 aluminum alloy was adopted as a substitute material.Based on the ProCAST finite element simulation platform,the permanent mold gravity casting process optimization of A356 aluminum alloy fracturing truck cylinder liners was carried out.Numerical simulations of the filling and solidification processes of the original top-gating process were performed to predict the generation positions and distribution patterns of internal shrinkage cavity and shrinkage porosity defects,followed by process optimization.The results show that the original top-gating process suffers from severe turbulence during mold filling,uneven temperature field distribution,prominent central hot spot,and interruption of the feeding channel,leading to susceptibility to shrinkage cavity and shrinkage prosity in key regions of the casting,which fails to meet the service requirements of the cylinder liner.The gating system was then optimized,and numerical simulations of the filling and solidification of the optimized bottom-gating process were conducted.The results indicate that the optimized bottom-gating process achieves stable and splash-free filling,elimination of hot spots,unblocked feeding channels,effective control of shrinkage cavity and shrinkage porosity in the casting body,and improved density and internal quality.The lightweight achievement of cylinder liners using aluminum alloy exhibits promising application prospects under low-load conditions,providing a reliable numerical simulation basis and reference for lightweight design and defect control of similar long cylindrical aluminum alloy castings and fracturing truck components.
樊雨成;杨维庆;王维一;杨中书;刘爱军
中国石油集团海洋工程有限公司钻井分公司 天津 300480安徽聚力石油钻采设备科技有限公司 安徽池州 247117合肥工业大学材料科学与工程学院 安徽 合肥 230009安徽聚力石油钻采设备科技有限公司 安徽池州 247117合肥工业大学材料科学与工程学院 安徽 合肥 230009
A356铝合金缸套金属型重力铸造ProCAST数值模拟缩孔缩松工艺优化
A356 aluminum alloy cylinder linerpermanent mold gravity castingProCASTnumerical simulationshrinkage cavity and porosityprocess optimization
《金属加工(热加工)》 2026 (10)
39-45,7
宁夏回族自治区自然科学基金(2024AAC03830).
评论