基于WOA优化MPC参数的压电执行器线性化控制OA
WOA-Optimized MPC Parameters for Linearized Control of Piezoelectric Actuators
为了提高压电执行器调速系统的控制性能,提出了一种基于鲸鱼优化算法(Whale Optimization Algorithm,WOA)优化模型预测控制(Model Predictive Control,MPC)参数的压电执行器线性化控制方法.首先,对压电执行器进行温度耦合的非线性建模,在SolidWorks中构建其三维模型,在Comsol中仿真并分析定子的振动模态;其次,建立Koopman离散状态空间模型,设计压电执行器模型预测控制器,提高系统的控制精度;最后,通过WOA整定MPC参数实现压电执行器的高精度控制.结果表明,WOA优化后的Koopman-MPC控制方法将系统超调量相较于Koopman-MPC减小1.68%,调节时间缩短至0.6 s以内,展现出更优的控制效果.
To enhance the control performance of the piezoelectric actuator speed regulation system,a linearized control method based on the whale optimization algorithm(WOA)for optimizing model predictive control(MPC)parameters is proposed.Firstly,a temperature-coupled nonlinear model of the piezoelectric actuator is developed,and its three-dimensional model is constructed in SolidWorks.The vibration modes of the stator are then simulated and analyzed in COMSOL.Subsequently,a Koopman discrete state-space model is established,and a model predictive controller is designed for the piezoelectric actuator to improve the control accuracy of the system.Finally,high-precision control of the piezoelectric actuator is achieved by tuning the MPC parameters using WOA.The results demonstrate that the WOA-optimized Koopman-MPC control method reduces the system overshoot by 1.68%compared to that of the conventional Koopman-MPC,shortens the settling time to within 0.6 s,and exhibits superior control performance.
赵美婷;亓雪;谭秋林
中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051
信息技术与安全科学
压电执行器鲸鱼优化算法模型预测控制线性化控制
piezoelectric actuatorwhale optimization algorithm(WOA)model predictive control(MPC)linearized control
《测试技术学报》 2026 (5)
625-632,8
山西省基础研究计划青年项目(202303021222112)教育部重点实验室开放基金资助项目(WNQJ202505)
评论