NiCr/NiSi薄膜热电偶制备及TiO2薄膜沉积温度精准测量技术OA
Preparation of NiCr/NiSi Thin-Film Thermocouples and Precise Temperature Measurement Technology for TiO2 Thin-Film Deposition
薄膜生长表面温度是磁控溅射薄膜微观结构和核心性能的关键决定因素.然而,传统测温方法因时空分辨率不足和热惯性大,难以准确区分薄膜表面温度和基片温度的差异,导致工艺调控缺乏科学依据.为解决这一问题,提出了一种基于NiCr/NiSi薄膜热电偶的精准测温技术.该技术采用直流脉冲磁控溅射法制备热电偶,并通过静态标定获得其塞贝克系数为10.42 μV/℃.其次,搭建了双热电偶同步测温系统,以TiO2薄膜为研究对象,在0.83~5.00 W/cm2溅射功率密度范围内,成功实现了薄膜表面温度与基片温度的同步测量.结果表明,热能主要在薄膜表面被吸收,并且薄膜表面与基片之间存在显著温度梯度,薄膜表面温度远高于基片温度.随着功率密度的提升,薄膜表面温度从197℃升至541℃,而基片温度则从125℃升至324℃.该技术具有高时空分辨率和快速响应的特点,能够精准捕捉表面瞬态温度变化,为优化薄膜工艺和调控其性能提供了可靠的数据支持,对推动高性能薄膜的可控制备具有重大意义.
The surface temperature during thin-film growth is critical in determining the microstructure and performance of the film's core.However,conventional temperature measurement techniques cannot accurately differentiate between the surface temperature of the film and the temperature of the substrate.This is due to inadequate spatiotemporal resolution and high thermal inertia,consequently providing a sci-entific foundation for process control that is lacking.To address this issue,this paper presents a precise temperature measurement technique based on NiCr/NiSi thin-film thermocouples.The thermocouples were fabricated using direct current pulse magnetron sputtering,yielding a Seebeck coefficient of 10.42 μV/℃as determined by static calibration.Secondly,a dual-thermocouple synchronous temperature measurement system was established.Using TiO2 films as the research subject,we successfully achieved the simultaneous measurement of film surface and substrate temperatures across a sputtering power density range of 0.83 to 5.00 W/cm2.The study's findings demonstrate that thermal energy absorption predomi-nantly occurs at the film surface,accompanied by a significant temperature gradient between the film sur-face and the substrate.The temperature of the film surface is evidently considerably higher than that of the substrate.As the power density increased,the surface temperature rose from 197℃to 541℃,while the substrate temperature increased from 125℃to 324℃.This technology is distinguished by its high spatio-temporal resolution and rapid response,facilitating the precise capture of transient surface tempera-ture changes.Reliable data is crucial for optimising thin-film processes and regulating their performance.It is also vital for advancing the controllable fabrication of high-performance thin films.
刘智慧;李燕宁;田朋;刘滔;谭秋林
中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051
信息技术与安全科学
直流脉冲磁控溅射NiCr/NiSi薄膜热电偶TiO2薄膜沉积温度测量
DC pulse magnetron sputteringNiCr/NiSi thin-film thermocouplesTiO2 thin filmsdeposi-tion temperature measurement
《测试技术学报》 2026 (5)
600-609,10
国家自然科学基金青年科学基金资助项目(52501014)
评论