标准渐开线的双抛物线拟合法OA
Two-Parabola Approximation Method for Standard Involute Curves
针对标准渐开线测量曲线的高精度拟合难题,提出了一种双抛物线拟合方法,用于渐开线测量序列的参数化表征.首先,将渐开线测量曲线段分割为两段,以拟合残差均衡为判据寻优方式寻找出最佳分割点,使分割点两侧的渐开线段在各自的抛物线拟合中的拟合残差有效值最接近;然后,对最佳分割点两侧的渐开线测量线段分别使用抛物线拟合法进行曲线拟合,并获得各自的拟合参数作为本段曲线的表征参数.最后,在仿真实验数据上验证了双抛物线拟合法的有效性与可行性,其拟合精度相比单抛物线法提高6倍以上,可用于渐开线齿轮齿廓等的计量校准.
A double parabolic fitting method is proposed to address the high-precision fitting problem of standard involute measurement curves for the parametric characterization of involute measurement sequences.First,the involute measurement curve segment is divided into two segments;then,the opti-mal segmentation point is found by using the criterion of fitting residual balance to find the best segmenta-tion point,so that the involute segments on both sides of the segmentation point have the closest fitting residual error in their respective parabolic fitting.Then,by using the parabolic fitting method to fit the waveform of the involute on both sides of the optimal segmentation point,the fitting parameters are obtained as the characteristic parameters of this curve segment.On a set of simulation experiment data,the effectiveness and feasibility of the double parabolic fitting method were verified,and its fitting accuracy can be improved by more than 6 times compared to the single parabolic method.It can be used for metro-logical calibration of involute gear tooth profiles,etc.
梁志国;刘欣荣;梁家奕;段小艳
北京长城计量测试技术研究所 计量与校准技术国家重点实验室,北京 100095北京长城计量测试技术研究所 计量与校准技术国家重点实验室,北京 100095电子科技大学 信息与软件工程学院,四川 成都 611700北京航空航天大学 仪器科学与光电工程学院,北京 100191
机械制造
渐开线抛物线曲线拟合最小二乘法
involuteparaboliccurve-fittingleast square
《测试技术学报》 2026 (5)
592-599,8
评论