首页|期刊导航|测试技术学报|基于SOI的MEMS高温压力传感器

基于SOI的MEMS高温压力传感器OA

High-Temperature MEMS Pressure Sensors Based on SOI

中文摘要英文摘要

为满足航空航天、能源工业等领域在高温、振动等恶劣工况下的压力测量需求,设计了一款基于绝缘体上硅(Silicon on Insulator,SOI)材料的压阻式压力传感器.该传感器采用SOI材料的埋氧层实现压敏电阻与基底的电隔离,解决了传统硅基传感器在高温下因PN结漏电导致的性能退化问题.传感器核心设计包括:采用E型岛膜结构作为弹性敏感薄膜,通过有限元仿真优化确定膜片尺寸,在保证灵敏度的同时降低非线性误差;完成芯片制备,通过工艺实现压敏电阻与电极制备;采用薄膜隔离充油封装工艺,注入高温硅油传递压力,避免金迁移对电信号传输的影响.性能测试结果表明,该传感器满量程过载压力下表现优异,常温下灵敏度达 0.099 mV/kPa/V,满量程输出 99.990 1 mV,压力迟滞低于 0.021 2%FS,重复性为0.020%FS,可在高温环境下稳定工作,满足复杂工况的测量需求.

To meet the pressure measurement requirements in harsh conditions such as high temperatures and vibrations in fields like aerospace and energy industry,a piezoresistive pressure sensor based on insulator-on-silicon(SOI)material is designed in this paper.This sensor uses the buried oxygen layer of SOI material to achieve electrical isolation between the piezoresistive element and the substrate,solving the performance degradation problem of traditional silicon-based sensors caused by P-N junction leakage at high temperatures.The core design of the sensor includes:using an E-shaped island membrane structure as the elastic sensitive film,optimizing the membrane size through finite element simulation to ensure sensitivity while reducing non-linear error;completing the chip fabrication,achieving the preparation of piezoresistive elements and electrodes through the process;adopting the film isolation filled with oil packaging technology,injecting high-temperature silicone oil to transfer pressure,avoiding the influence of gold migration on signal transmission.The performance test results show that this sensor performs excellently under full-scale overload pressure,with a sensitivity of 0.099 mV/kPa/V at room temperature,a full-scale output of 99.990 1 mV,a pressure hysteresis of less than 0.021 2%FS,a repeatability of 0.020%FS,and can work stably in high-temperature environments,meeting the measurement requirements of complex conditions.

郝豹;包雨豪;张晓海;张心茹;张磊

中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051中北大学 微纳器件与系统教育部重点实验室,山西 太原 030051||中北大学 极限环境光电动态测试技术与仪器全国重点实验室,山西 太原 030051

信息技术与安全科学

高温压力传感器充油式有限元分析绝缘体上硅

high-temperature pressure sensoroil-filled typefinite element analysissilicon on insulator

《测试技术学报》 2026 (5)

583-591,9

国家科技重大专项(J2022-V-0005-0031)

10.62756/csjs.1671-7449.2026077

评论