首页|期刊导航|锅炉技术|磨煤机配煤掺烧适配性及工况优化改进应用

磨煤机配煤掺烧适配性及工况优化改进应用OA

Application of Coal Blending Adaptability and Operating Condition Optimization Improvement for Coal Mills

中文摘要英文摘要

为解决燃煤发电厂配煤掺烧引发的中速磨煤机适应性不足、出力下降及工况劣化等问题,以国能陈家港电厂 HP1003Dyn 型 D、E 磨煤机为改造对象,通过提升减速机速比、更换高强弹簧组件等改进措施,验证提升减速机速比与加载力优化对制粉出力和效率的影响.结果表明:提升 D、E 磨煤机减速机速比以及更换高强弹簧组件后,D 磨煤机的最大出力由 54.9 t/h 增加到 64.5 t/h,出力提升 17.48%;E 磨煤机的最大出力由51.1 t/h 增加到 64.5 t/h,出力提升 26%.

To address the issues of inadequate adaptability,reduced output,and deteriorated operating conditions of medium-speed coal mill caused by blended coal combustion in coal-fired power plants,the HP1003 Dyn type mill D and E in Guoneng Chenjiagang Power Plant were selected for retrofitting.Improvement measures including increasing the gear reducer speed ratio and replacing high-strength spring assemblies were implemented to validate the effects of enhanced gear reducer speed ratio and optimized loading force on pulverizing output and efficiency.The results show that after increasing the gear reducer speed ratio and replacing the high-strength spring assemblies,the maximum output of mill D increased from 54.9 t/h to 64.5 t/h,representing an increase of 17.48%;The maximum output of mill E increased from 51.1 t/h to 64.5 t/h,representing an increase of 26%.

崔体磊;王海锋;刘海峰;黄敏智

国能陈家港发电有限公司,江苏 盐城 224624国能陈家港发电有限公司,江苏 盐城 224624国能陈家港发电有限公司,江苏 盐城 224624国能陈家港发电有限公司,江苏 盐城 224624

能源科技

磨煤机配煤掺烧速比调整加载力优化出力提升

coal millblended coal combustionspeed ratio adjustmentloading force optimizationoutput enhancement

《锅炉技术》 2026 (5)

58-62,5

评论