散粮码头接料漏斗粉尘治理方案研究与应用OA
Research and Application of Dust Control Solutions to Receiving Hoppers in Bulk Grain Terminals
在生态文明建设与绿色港口政策驱动下,散粮码头门座式起重机+接料漏斗工艺粉尘外溢现象,既引发环保限产停产,又存在职业健康与粉尘爆炸双重风险,是行业共性治理痛点.本文针对某港固定式接料斗卸船工艺,依托缓冲降速、局部负压、智能联动理念,通过优化分室结构、弹性闭尘扇板及分级吸风系统,结合流体仿真精准设计风量与设备选型,打造了一套结构抑尘与主动除尘协同方案.该方案低成本破解卸船粉尘难题,兼顾安全与健康保障,可为散粮码头绿色改造提供可推广范式.
With regarding to the dust overflow phenomena resulting from the process of portal crane plus receiving hoppers at bulk grain terminals,which not only leads to production restriction or shutdown due to environmental non-compliance,but also dual risks of occupational health hazards and dust explosion,common industrial pain points were identified subject to China state policies of ecological civilization construction and green port.As for the ship-unloading process with fixed receiving hoppers in a port,a collaborative plan of integrating structure dust-suppression with active dust removal were proposed by optimizing compartment structure,elastic dust-tight flaps and graded air suction system,and accurately designing air volume and equipment type combined with fluid simulation based on the concepts such as buffered deceleration,local negative pressure,and intelligent linkage.This plan solves the difficulties in dust removal during the process of ship-unloading subject to low cost,takes into account safety and health protection,and serves as a successful application in green transformation of bulk grain terminals.
高天佑;陈瑶;吕晗恺;陈厚斌
中交第一航务工程勘察设计院有限公司,天津 300220中交第一航务工程勘察设计院有限公司,天津 300220青岛港国际股份有限公司董家口分公司,山东 青岛 266000青岛港国际股份有限公司董家口分公司,山东 青岛 266000
交通工程
散粮码头粉尘治理接料漏斗多点给料环保技术除尘系统
bulk grain terminaldust controlreceiving hoppermulti-point feedingenvironmental protection technologydust removal system
《港口航道与近海工程》 2026 (5)
26-30,5
评论