基于滑模观测器的电液伺服系统位置输出控制方法OA
Position output control method of electro-hydraulic servo system based on sliding mode observer
针对只有位置信号可测的非对称缸电液系统,提出了一种基于滑模观测器的输出反馈控制器.首先,建立了非对称缸系统的布鲁诺夫斯基模型.然后,设计了滑模观测器估计系统状态,并采用连续切换函数替换了滑模控制器中的鲁棒项,抑制了系统固有的抖振.最后,利用李亚普诺夫理论证明了整个系统的稳定性.仿真和实验结果表明,相比 PID 控制器,所设计的输出反馈控制器的位置跟踪精度可提高 45.5%,且具有更好的状态估计性能.
Aiming at the asymmetric cylinder electro-hydraulic system where only the position signal can be measured,an output feedback controller based on the sliding mode observer is proposed.Firstly,the Brunovsky model of the asymmetric cylinder system was established.Then,a sliding mode observer was designed to estimate the system state,and a continuous switching function was adopted to replace the robust terms in the sliding mode controller,reducing the inherent buffeting of the system.Finally,the stability of the entire system was proved via Lyapunov theory.Comparative simulation and experimental results demonstrate that,compared with the conventional PID controller,the proposed output feedback controller improves the position tracking accuracy by 45.5% and achieves superior state estimation performance.
万鹏;王云飞;杨家稳
滁州职业技术学院 基础教学部,安徽 滁州 239000中国矿业大学 安全工程学院,江苏 徐州 221116||徐州工程机械集团 高端工程机械智能制造国家重点实验室,江苏 徐州 221132滁州职业技术学院 基础教学部,安徽 滁州 239000
信息技术与安全科学
电液伺服系统输出反馈控制滑模观测器改进滑模控制
electro-hydraulic servo systemoutput feedback controlsliding mode observerimproved sliding mode control
《佛山大学学报(自然科学版)》 2026 (5)
52-57,6
中国博士后科学基金面上项目(2022M722671)江苏省自然科学基金青年基金项目(BK20241640)安徽省教育厅科学研究项目(2023AH053087)
评论