大尺寸超薄碳化硅晶圆制备技术研究及其先进封装应用OA
Fabrication Technology of Large-Size Ultra-Thin Silicon Carbide Wafers and Applications in Advanced Packaging
随着AI芯片和第三代半导体等领域的快速发展,碳化硅(SiC)正向大尺寸和超薄化方向演进.但SiC具有莫氏硬度高、脆性大、对磨削损伤敏感和大尺寸晶圆厚度均匀性难控制等特点,传统减薄易引发翘曲、裂纹和破片.为此,提出一种基于室温临时键合与精密减薄的大尺寸超薄SiC晶圆制备技术.该技术适配6、8英寸晶圆,并在8英寸SiC晶圆上实验验证了25~150μm范围内厚度的可控制备,总厚度偏差(TTV)≤3.0 μm,表面粗糙度(Ra)≤2.0nm.测试结果表明,所制备的8英寸超薄SiC晶圆厚度为29.5~31.6 μm,TTV=2.1 μm,Ra=1.61 nm,验证了该技术在大尺寸、超薄化和高平整度加工方面的可行性.
With rapid advancements in fields such as AI chips and third-generation semiconductors,silicon carbide(SiC)is evolving toward larger sizes and reduced thickness.However,SiC is characterized by high Mohs hardness,high brittleness,sensitivity to grinding-induced damage,and difficulty in controlling thickness uniformity over large-size wafers;consequently,warpage,cracks and wafer breakage are readily induced by conventional thinning.To address these problems,a large-size ultra-thin SiC wafer fabrication technology based on room-temperature temporary bonding and precision thinning is proposed.The proposed technique is compatible with 6-inch and 8-inch SiC wafers,and thickness-controllable preparation in the 25-150 μm range is validated through experiments on 8-inch SiC wafers,with a total thickness variation(TTV)of ≤ 3.0 μm and a surface roughness(Ra)of ≤ 2.0 nm.It is shown by the test results that the fabricated 8-inch ultra-thin SiC wafer is characterized by a thickness of 29.5-31.6 μum,a TTV of 2.1 μm and an Ra of 1.61 nm,verifying the feasibility of the proposed technology for large-size,ultra-thin and high-flatness fabrication.
喻志奎;朱一新;万青
甬江实验室,浙江宁波 315202甬江实验室,浙江宁波 315202甬江实验室,浙江宁波 315202
信息技术与安全科学
大尺寸超薄SiC室温临时键合精密减薄先进封装散热中介层
large-size ultra-thin SiCroom-temperature temporary bondingprecision thinningadvanced packagingthermal interposer
《电子与封装》 2026 (9)
84-88,5
浙江省重点研发计划(2024SSYS0042)浙江省引进和培育领军型创新及创业团队基金(2023R01011)
评论