三相四线制Vienna整流器的控制方法OA
Control Methods of Three-phase Four-wire Vienna Rectifier
为解决三相四线制Vienna整流器的电流过零畸变问题与中点电压偏移问题,提出了2种控制方法:抑制电流过零畸变控制方法和中点电压主动控制方法.首先,针对三相四线制Vienna整流器,分析了其拓扑结构和运行原理,结合换流路径说明了电流过零畸变产生的原因,提出了抑制电流过零畸变的控制方法.然后,分析了直流侧电容电压变化情况,给出了注入零序电流的中点电压主动控制方法;最后,通过实验验证所提控制方法的有效性.实验结果表明,通过所提控制方法,Vienna整流器既消除了电流过零畸变,又达到了中点电位平衡,证明了控制方法的有效性.
To solve the problems of current zero-crossing distortion and midpoint voltage offset in three-phase four-wire Vienna rectifiers,two control methods namely the current zero-crossing distortion suppression and active control of midpoint voltage are proposed.First,for the three-phase four-wire Vienna rectifier,the topology structure and operating principle are analyzed,the causes of current zero-crossing distortion are explained in combination with the commutation path,and a control method to suppress current zero crossing distortion is proposed.Then,the variation of DC-side capacitor voltage is analyzed,and a midpoint voltage active control method based on zero-sequence current injection is given.Finally,experiments are performed to verify the effectiveness of the proposed control method.The experimental results show that with the proposed control method,the Vienna rectifier can eliminate current zero-crossing distortion and achieve midpoint potential balance.
王金平;杨柳;刘圣宇;钟敏;刘欣然;徐星俣
合肥工业大学电气与自动化工程学院,合肥 230009合肥工业大学电气与自动化工程学院,合肥 230009合肥工业大学电气与自动化工程学院,合肥 230009合肥工业大学电气与自动化工程学院,合肥 230009合肥工业大学电气与自动化工程学院,合肥 230009合肥工业大学电气与自动化工程学院,合肥 230009
信息技术与安全科学
三相四线制Vienna整流器电流过零畸变中点电位平衡
Three-phase four-wire Vienna rectifiercurrent zero-crossing distortionmidpoint potential balance
《电源学报》 2026 (9)
32-42,11
评论