基于Ostrowski迭代的五轴轮廓误差估计与补偿控制OA
Five-axis contour error estimation and compensation control based on Ostrowski iteration
为提高五轴数控(CNC)机床复杂轨迹的轮廓加工精度,本文提出一种基于 Ostrowski迭代的轮廓误差估计与补偿控制方法.首先,基于 D-H 法建立五轴数控机床的运动学模型.然后,采用引入曲率信息的 Ostrowski 迭代法进行轮廓误差估计,快速逼近参考轨迹上实际位置的轮廓误差点.最后,设计比例(P)型迭代学习控制器,将估计得到的轮廓误差补偿到参考轨迹上.仿真结果表明,采用本文所提出的方法可以有效减小五轴加工过程中的轮廓误差,提高轮廓控制精度.
To improve the contour machining accuracy of complex trajectories on five-axis computer numerical control(CNC)machine tools,a contour error estimation and compensation control method based on Ostrowski iteration is proposed.First,the kinematic model of the five-axis CNC machine tool is established based on the Denavit-Hartenberg(D-H)method.Then,the Ostrowski iteration method,incorporating curvature information,is used for contour error estimation to quickly approximate the contour error points of the actual position on the reference trajectory.Finally,a proportional(P)iterative learning controller is designed to compensate the estimated contour error back onto the reference trajectory.Simulation results show that the proposed method can effectively reduce contour errors during five-axis machining and improve contour control accuracy.
李爽;王丽梅
沈阳工业大学电气工程学院,沈阳 110870沈阳工业大学电气工程学院,沈阳 110870
五轴数控(CNC)机床轮廓误差Ostrowski迭代迭代学习控制
five-axis computer numerical control(CNC)machinecontour errorOstrowski iterationiterative learning control
《电气技术》 2026 (10)
28-33,63,7
评论