首页|期刊导航|电气技术|基于虚拟电流分解的模块化多电平换流器跟网/构网融合控制及其阻抗分析

基于虚拟电流分解的模块化多电平换流器跟网/构网融合控制及其阻抗分析OA

Fusion control of grid-following and grid-forming modular multilevel converter based on grid-current decomposition with impedance characterization

中文摘要英文摘要

模块化多电平换流器(MMC)具有损耗低、谐波含量低等优点,是柔性直流输电系统的主流拓扑.在不同电网强度下,单一跟网型(GFL)或构网型(GFM)控制均难以兼顾系统稳定性.为此,本文提出一种基于虚拟电流分解的 MMC 跟网/构网融合控制(FC)策略.该方法在统一框架下,通过权重调节实现 GFL 与 GFM 控制特性的平滑融合.同时,建立融合控制下 MMC输出阻抗模型,揭示其对端口外特性重构的机理.仿真结果表明,在本文设定参数及测试工况下,所提策略在短路比(SCR)为 1.8~16 范围内均能保持稳定运行,并表现出较好的运行平稳性与电网适应能力.

Modular multilevel converter(MMC),featuring low power loss and low harmonic distortion,has become the mainstream topology in flexible DC transmission systems.Under varying grid strengths,neither standalone grid-following(GFL)nor grid-forming(GFM)control can simultaneously ensure system stability.To address this issue,this paper proposes a fusion control(FC)strategy for MMCs that integrates GFL and GFM control based on virtual current decomposition.Within a unified framework,smooth integration of GFL and GFM control characteristics is achieved through weight adjustment.Meanwhile,an output impedance model of the MMC under fusion control is established,revealing the mechanism by which the external port characteristics are reshaped.Simulation results show that,under the test conditions considered in this paper,the proposed strategy can maintain stable operation over an short circuit ratio(SCR)range of 1.8 to 16,while exhibiting good operational smoothness and grid adaptability.

李强盛;吴迪;李明明;柏祥

江苏海洋大学电子工程学院,江苏 连云港 222005江苏海洋大学电子工程学院,江苏 连云港 222005江苏海洋大学电子工程学院,江苏 连云港 222005南方电网广州供电局,广州 510200

模块化多电平换流器(MMC)融合控制(FC)跟网控制构网控制

modular multilevel converter(MMC)fusion control(FC)grid-followinggrid-forming

《电气技术》 2026 (10)

12-20,9

江苏省高等学校基础科学(自然科学)研究面上项目(24KJB470006)

评论