首页|期刊导航|船电技术|气相沉积法制备磷碳负极及其储钠特性研究

气相沉积法制备磷碳负极及其储钠特性研究OA

Synthesis of phosphorus-carbon composite anode via vapor deposition method and its sodium storage properties

中文摘要英文摘要

本文针对钠离子电池中部分负极材料容量有限、钠沉积电位过低(易引发枝晶问题)的不足,提出一种通过气相沉积将红磷以亚纳米尺度均匀分散于活性炭微孔结构中的磷碳(P/C)复合材料.该材料兼具资源丰富、成本低廉、比容量高、工作电位适宜(高于钠沉积电位,通过合金化反应储钠)及阻燃性好等优点,有望成为下一代负极候选材料.测试结果表明,P/C 在半电池中展现出优异的循环稳定性(0.2 A·g-1下比容量为 551.6 mAh·g-1,100 次循环后容量保持率 92.1%).此外,基于该负极组装的较高面容量(1.99 mAh·cm-2)全电池亦可稳定循环 100 次以上,显示出良好的实际应用前景.

To addresses the limitations of certain negative electrode materials for sodium-ion batteries,specifically limited capacity and excessively low sodium deposition potential(which readily induces dendrite formation),this paper proposes a phosphorus-carbon(P/C)composite material in which red phosphorus is uniformly dispersed at the sub-nanometer scale within the microporous structure of activated carbon via a vapor deposition method.This composite combines several advantageous features,including abundant resources,low cost,high specific capacity,suitable operating potential(higher than the sodium deposition potential,enabling sodium storage through an alloying reaction),and good flame retardancy,making it a promising candidate for next-generation anodes.Electrochemical test results demonstrate that the P/C composite exhibits excellent cycling stability in a half-cell configuration,delivering a specific capacity of 551.6 mAh·g-1 at 0.2 A·g-1 with a capacity retention of 92.1%after 100 cycles.Furthermore,a full cell assembled with this anode achieves a high areal capacity of 1.99 mAh·cm-2 and can be stably cycled for over 100 cycles,indicating favorable prospects for practical applications.

李靖夷;姚敦靖;何伟;谢鸿涛;程冰冰

武汉船用电力推进装置研究所,武汉 430046武汉船用电力推进装置研究所,武汉 430046武汉船用电力推进装置研究所,武汉 430046武汉船用电力推进装置研究所,武汉 430046武汉船用电力推进装置研究所,武汉 430046

通用工业技术

红磷活性炭气相沉积法钠离子电池

red phosphorusactivated carbonvapor deposition methodsodium ion battery

《船电技术》 2026 (10)

35-39,5

评论