首页|期刊导航|船电技术|船舶变频推进电机轴电流故障诊断模型研究

船舶变频推进电机轴电流故障诊断模型研究OA

Research on axial current fault diagnosis model of ship variable frequency propulsion motor

中文摘要英文摘要

针对船舶变频推进电机的容性轴电流、转轴接地轴电流和循环型轴电流的产生机制、流通路径及典型故障特征进行分析,构建涵盖共模通路、定转子接地阻抗及轴承电容的完整故障诊断模型,实现单类型与耦合型轴电流的精准识别.通过 MATLAB/Simulink 仿真分析与实验验证,模型可准确输出轴电流类型、幅值、击穿状态及轴承腐蚀类型预判等诊断信息.研究成果为船舶变频推进电机轴电流故障诊断与针对性抑制提供理论支撑和工程技术参考.

This study analyzes the generation mechanism,flow paths,and typical fault characteristics of capacitive shaft current,rotor-to-ground shaft current,and circulating shaft current in marine variable-frequency propulsion motors.A comprehensive fault diagnosis model incorporating common-mode pathways,stator/rotor grounding impedance,and bearing capacitance is established to enable precise identification of both single-type and coupled shaft currents.Through MATLAB/Simulink simulation analysis and experimental validation,the model accurately outputs diagnostic information including shaft current type,amplitude,breakdown state,and predicted bearing corrosion type.The research findings provide theoretical support and engineering references for fault diagnosis and targeted suppression of shaft current faults in marine variable-frequency propulsion motors.

李本彦;隋风明;王凯;彭俊杰

烟台打捞局,山东 烟台 264000烟台打捞局,山东 烟台 264000烟台打捞局,山东 烟台 264000烟台打捞局,山东 烟台 264000

交通工程

船舶变频推进电机轴电流故障诊断模型共模电压轴承电腐蚀

ship variable frequency propulsion motorshaft currentfault diagnosis modelcommon-mode voltagebearing electrochemical corrosion

《船电技术》 2026 (10)

10-13,4

评论