船舶空压机控制系统的设计与实现OA
Design and implementation of marine air compressor control system
针对传统船舶空压机控制系统存在的自动化程度低、操作繁琐、故障响应不及时等问题,本文设计了基于可编程逻辑控制器(PLC)的船舶空压机自动控制系统.系统完成了硬件设计与软件设计部分,实现了空压机的自动启停、气瓶压力调节、多台空压机错峰启动、常见故障报警与保护等功能.通过人机界面(HMI)实现状态显示与参数配置,提升了控制系统的可视化和智能化水平.仿真测试结果表明,系统自动启停响应时间为 1.1 s,压力控制精度达 0.018 MPa,报警反应速度为 0.9 s,各项指标均优于设计要求,运行稳定可靠,具有良好的工程应用价值.
To address the problems of low automation,complicated operation,and untimely fault response in traditional marine air compressor control systems,this paper designs an automatic control system for marine air compressors based on a programmable logic controller(PLC).The system completes hardware selection and connection,as well as software control logic programming,realizing functions such as automatic start/stop of the air compressor,pressure regulation of the air bottle,staggered start of multiple air compressors,and common fault alarms and protection.Through the Human-Machine Interface(HMI),status display and parameter configuration are achieved,improving the visualization and intelligence level of the system.Simulation test results show that the automatic start/stop response time is 1.1 s,the pressure control accuracy reaches 0.018 MPa,and the alarm response speed is 0.9 seconds.All indicators meet or exceed the design requirements,demonstrating stable and reliable operation with good engineering application value.
胡凯松;李凯;廖志强;冯韬;杨雨凡
广东海洋大学,广东 湛江 524088广东海洋大学,广东 湛江 524088||广东省南海海洋牧场智能装备重点实验室,广东 湛江 524088广东海洋大学,广东 湛江 524088||广东省南海海洋牧场智能装备重点实验室,广东 湛江 524088广东海洋大学,广东 湛江 524088广东海洋大学,广东 湛江 524088
交通工程
空压机PLC梯形图控制系统HMI
air compressorPLCladder diagramcontrol SystemHMI
《船电技术》 2026 (10)
1-4,4
国家自然科学基金项目(52201355)、广东海洋大学博士科研启动经费资助项目(060302132612)、广东海洋大学大学生创新训练项目(010413132214)
评论