首页|期刊导航|中国造纸学报|甲醛辅助酸性低共熔溶剂预处理毛竹制备微晶纤维素的研究

甲醛辅助酸性低共熔溶剂预处理毛竹制备微晶纤维素的研究OA

Study on the Preparation of Microcrystalline Cellulose from Moso Bamboo with Pretreatment Using Formaldehyde-assisted Acidic Deep Eutectic Solvent

中文摘要英文摘要

以毛竹为原料,采用甲醛辅助氯化胆碱/乳酸(ChCl/LA)低共熔溶剂对毛竹进行预处理,并通过漂白及酸水解工艺制备得到微晶纤维素(MCC).结果表明,在ChCl与LA物质的量比1∶5、预处理温度120℃、预处理时间3 h的条件下进行甲醛辅助ChCl/LA预处理,固形物得率58.9%,固形物中纤维素含量59.6%,半纤维素去除率62.0%,木质素去除率69.9%;经进一步漂白得到的浆料中纤维素含量高达92.3%;酸水解后制得的MCC(得率84.8%)保留了纤维素I型结晶结构,结晶度指数高达73.2%,纤维素聚合度148,且具有良好的分散稳定性和热稳定性,Zeta电位绝对值接近25 mV.

Using Moso bamboo as the raw material,the bamboo was pretreated with a formaldehyde-assisted choline chloride/lactic acid(ChCl/LA)deep eutectic solvent,and microcrystalline cellulose(MCC)was prepared through bleaching and acid hydrolysis processes.The results showed that under conditions of ChCl to LA molar ratio of 1∶5,pretreatment temperature of 120℃,and pretreatment time of 3 h,the formaldehyde-assisted ChCl/LA pretreatment prepared a solid product with a yield of 58.9%,cellulose content of 59.6%,hemicellulose removal rate of 62.0%,and lignin removal rate of 69.9%.the pulp obtained after further bleaching had a cellulose content as high as 92.3%.The MCC prepared after acid hydrolysis retained the Type Ⅰ crystalline structure of cellulose,with a yield of 84.8%,cellulose polymerization degree of 148,and crystallinity index as high as 73.2%,and exhibited good dispersion stability and thermal stability,its absolute value of Zeta potential was close to 25 mV.

陈卓越;陈天影;张文标;唐艳军

浙江理工大学生物基纤维材料全国重点实验室,浙江 杭州,310018浙江理工大学生物基纤维材料全国重点实验室,浙江 杭州,310018浙江农林大学竹子研究院,浙江 杭州,311300浙江理工大学生物基纤维材料全国重点实验室,浙江 杭州,310018

轻工纺织

毛竹预处理甲醛低共熔溶剂微晶纤维素

Moso bamboopretreatmentformaldehydedeep eutectic solventmicrocrystalline cellulose

《中国造纸学报》 2026 (3)

40-49,10

浙江省"尖兵领雁+X"科技计划项目(2025C02204)国家自然科学基金(22208309,22078306)宁波市科技创新项目(2022Z101,2023Z142)衢州科技计划项目(2024K046,QJ2025035)浙江理工大学基本科研基金(24202098-Y).

10.11981/j.issn.1000-6842.2026.03.40

评论