Ni/HZSM-5上LDPE低温加氢裂化制备窄分布C3H8~C5H12烷烃OA
Low-Temperature Hydrocracking of LDPE to Narrow-Distribution C3H8-C5H12 Alkanes over Precision-Impregnated Ni/HZSM-5
本文通过精密浸渍法制备了Ni负载量为5 wt.%的Ni/HZSM-5催化剂,并应用于低密度聚乙烯(LDPE)的低温加氢裂化,利用简单的催化体系将LDPE定向转化为窄分布的C3(丙烷)~C5(戊烷)烷烃.实验结果表明,LDPE的转化率高达99.0%,C3~C5的产率为85.4 wt.%,目标产物的选择性超过99.0%,且催化剂表现出优异的稳定性,在5次循环使用后无明显失活.对催化剂的制备参数和反应条件进行了优化,确定了最佳制备方案:以Si/Al比25的HZSM-5为载体,Ni负载量为5 wt.%,随后在550℃下煅烧4 h,并在450℃的H2气氛中还原4 h.使用C6H14和CH3OH作为模型化合物进行的H·调节实验证实,高选择性是由CH3·的聚合引起的,H·促进了小分子中间体的形成,并促进碳链长度为3~5的中间体稳定转化为烷烃.实验表明该催化机制对LDPE和聚丙烯均适用.本文提供了一种高效的非贵金属催化体系,并为废聚乙烯的定向转化提供了理论支持.
In this work,a 5 wt.%Ni/HZSM-5 catalyst is prepared via precision impregnation and applied in the low-temperature hydrocracking of low-density polyethylene(LDPE),realizing the directional conversion of LDPE into narrow-distributed C3(pro‐pane)-C5(pentane)alkanes using a simple catalytic system.Experimental results show that the LDPE conversion reaches 99.0%,the C3-C5 yield is 85.4 wt.%,and the selectivity toward the target products exceeds 99.0%.The catalyst exhibits excellent stability with no obvious deactivation after 5 recycling runs.The catalyst preparation parameters and reaction conditions are experimentally optimized,and the optimal preparation protocol is determined:HZSM-5 with a Si/Al ratio of 25 is used as the support with a Ni loading of 5 wt.%,followed by calcination at 550℃for 4 h and reduction in a hydrogen atmosphere at 450℃for 4 h.Hydrogen radical regulation experiments using C6H14 and CH3OH as model compounds confirmed that the polymerization of methyl radicals(CH3·)contributed to the high selectivity,and hydrogen radicals(H·)mainly promoted the formation of small-molecule intermedi‐ates and stabilized the formation of alkanes from intermediates with carbon chain lengths of 3-5.This catalytic mechanism is proven to be universal for both LDPE and polypropylene.This work provides an efficient non-noble metal catalytic system and theoretical support for the directional conversion of waste polyethylene.
党志龙;王衡;赵凌霄;谢翔宇;毛宁;白小薇;代正华;李建
新疆大学 碳基能源资源化学与利用国家重点实验室,新疆 乌鲁木齐 830017新疆大学 碳基能源资源化学与利用国家重点实验室,新疆 乌鲁木齐 830017新疆大学 碳基能源资源化学与利用国家重点实验室,新疆 乌鲁木齐 830017新疆大学 碳基能源资源化学与利用国家重点实验室,新疆 乌鲁木齐 830017新疆大学 碳基能源资源化学与利用国家重点实验室,新疆 乌鲁木齐 830017新疆大学 碳基能源资源化学与利用国家重点实验室,新疆 乌鲁木齐 830017新疆大学 碳基能源资源化学与利用国家重点实验室,新疆 乌鲁木齐 830017||华东理工大学 煤气化及能源化工教育部重点实验室,上海 200237新疆大学 碳基能源资源化学与利用国家重点实验室,新疆 乌鲁木齐 830017
化学化工
LDPENi/HZSM-5加氢裂化C3~C5烷烃废塑料再利用催化剂稳定性
LDPENi/HZSM-5hydrocrackingC3-C5 alkaneswaste plastic recyclingcatalyst stability
《新疆大学学报(自然科学版中英文)》 2026 (5)
588-602,15
The Key Research and Development Project of Xinjiang Uygur Autonomous Region"Technology development for high-quality component recovery from oily sludge and efficient utilization of residues"(2025B01011)National Natural Science Foundation of China"Research on the mechanism of self-heating and product regulation during pyrolysis reaction of Xinjiang cotton stalk biomass under low oxygen conditions"(52266016).
评论