首页|期刊导航|现代交通技术|水性丙烯酸-环氧复合防水黏结层材料性能研究

水性丙烯酸-环氧复合防水黏结层材料性能研究OA

Study on the Properties of Waterborne Acrylic-epoxy Composite Waterproof Adhesive Layer Materials

中文摘要英文摘要

为提高桥面防水黏结层的力学性能与耐久性,采用物理共混法将不同丙烯酸乳液(苯丙、硅丙、纯丙)与水性环氧树脂复配,制备 3 类水性丙烯酸-环氧复合防水黏结材料(分别记为苯丙*、硅丙*及纯丙*),对比分析了其力学性能、耐高低温性能、耐腐蚀性能及抗渗性能.试验结果表明,3 种材料的拉伸强度与黏结强度均表现为硅丙*>苯丙*>纯丙*,其中硅丙*的拉伸强度为 4.36 MPa,较纯丙*提高 72.33%;苯丙*、硅丙*及纯丙*的黏结强度分别为2.68 MPa、2.89 MPa 与 2.03 MPa;高温性能和耐腐蚀性能同样为硅丙*最优、苯丙*次之、纯丙*最弱,且 3 种复合防水黏结层材料均具有良好的抗渗性能.低温性能方面,纯丙*的韧性及低温抗裂性能优于硅丙*和苯丙*.综合各项性能指标,硅丙*的性能最优,更适用于路桥桥面防水黏结工程.

In order to improve the mechanical properties and durability of bridge deck waterproof adhesive layer,three kinds of waterborne acrylic-epoxy composite waterproof adhesive materials(styrene-acrylic*,silicone-acrylic* and pure acrylic*)were prepared by physical blending method with different acrylic emulsions(styrene-acrylic,silicone-acrylic and pure acrylic)and waterborne epoxy resin.Their mechanical properties,high-low temperature resistance,corrosion resistance and impermeability were compared and analyzed.The results show that the tensile strength and adhesive strength of the three materials are all in the order of silicone-acrylic*>styrene-acrylic*>pure acrylic*.The tensile strength of silicone-acrylic* is 4.36 MPa,which is 72.33%higher than that of pure acrylic*.The adhesive strengths of styrene-acrylic*,silicone-acrylic* and pure acrylic* are 2.68 MPa,2.89 MPa and 2.03 MPa,respectively.The high temperature resistance and corrosion resistance are also the best for silicone-acrylic*,followed by styrene-acrylic*,the weakest for pure acrylic*,and the three composite waterproof adhesive layer materials have good impermeability.In terms of low temperature resistance,the toughness and low temperature crack resistance of pure acrylic* are better than those of silicone-acrylic* and styrene-acrylic*.Considering all the performance indexes,silicone-acrylic* has the best performance and is more suitable for waterproof adhe-sive engineering of road and bridge deck.

龙久添;何超;贾小勇;张露;何丽红;桑琦;赵智博

贵州省凯里公路管理局,凯里 556000贵州省凯里公路管理局,凯里 556000贵州省凯里公路管理局,凯里 556000贵州省凯里公路管理局,凯里 556000重庆交通大学材料科学与工程学院,重庆 400074重庆交通大学材料科学与工程学院,重庆 400074重庆交通大学材料科学与工程学院,重庆 400074

交通工程

水性丙烯酸水性丙烯酸-环氧防水黏结层黏结性能

waterborne acrylicwaterborne acrylic-epoxywaterproof adhesive layeradhesive properties

《现代交通技术》 2026 (4)

15-19,5

贵州省公路局科技项目(2022QLK08)

评论