光伏组件封装用电加热多层层压机的铝加热模组设计分析OA
ANALYSIS OF ALUMINUM HEATING MODULE DESIGN FOR ELECTRIC HEATING MULTI-LAYER LAMINATORS FOR PV MODULE PACKAGING
电加热系统是光伏组件封装用电加热多层层压机的关键部件.首先介绍了电加热多层层压机的基本结构和特点,然后比较了加热系统不同技术路线的优劣,最后深入研究了基于铝加热模组的电加热系统的设计,并提出了最佳设计方案.研究结果表明:1)铝加热模组在成本、安装难易程度、维修方便性、温度均匀性等综合能力方面均优于其他电加热技术.2)铝加热模组采用有边温排布方式更具优势.加热板中部区域的模组的功率密度通常在 5.0 kW/m2 左右(可根据加热板厚度进行增减);加热板四周边缘位置的模组的功率密度通常比中部区域的高 10%~15%;入料端和出料端附近的模组的功率密度比中部区域的高 5%左右.3)在保持三相平衡的前提下,加热板中部区域的铝加热模组采用 380 V 三相供电和单模组独立温度控制方式,加热板四周边缘位置的铝加热模组采用220 V单相供电和多模组整体温度控制方式为最佳设计方案.
The electric heating system is a key component of the electric heating multi-layer laminator for PV module packaging.This paper first introduces the basic structure and characteristics of the electric heating multi-layer laminator,then compares the advantages and disadvantages of different technical routes of the heating system,and finally deeply studies the design of the electric heating system based on the aluminum heating modules,and proposes the best design scheme.The research results show that:1)Aluminum heating modules are superior to other electric heating technologies in terms of comprehensive capabilities such as cost,installation difficulty,maintenance convenience,and temperature uniformity.2)The aluminum heating module adopts boundary temperature arrangement mode,which has more advantages.The power density of the module in the middle area of the heating plate is usually around 5.0 kW/m2(which can be adjusted according to the thickness of the heating plate).The power density of the modules around the edges of the heating plate is usually 10%to 15%higher than that in the middle area.The power density of the modules near the feeding and discharging ends is about 5%higher than that in the middle area.3)On the premise of maintaining three-phase balance,the aluminum heating module in the middle area of the heating plate adopts 380 V three-phase powered and single-module independent temperature control mode,the aluminum heating module around the edge of the heating plate adopts 220 V single-phase powered and multi-module overall temperature control mode,which is the best design solution.
惠英龙
秦皇岛博冠科技有限公司,秦皇岛 066000
信息技术与安全科学
光伏组件层压机电加热系统加热板铝加热模组排布方式温度控制
PV moduleslaminatorelectric heating systemheating platealuminum heating modulearrangement modetemperature control
《太阳能》 2026 (9)
80-88,9
评论