首页|期刊导航|四川轻化工大学学报(自然科学版)|20CrMnTi钢表面DLC复合涂层的结构优化与性能研究

20CrMnTi钢表面DLC复合涂层的结构优化与性能研究OA

Structural Optimization and Performance Study of DLC Composite Coating on the Surface of 20CrMnTi Steel

中文摘要英文摘要

为改善20CrMnTi钢基体表面的摩擦学性能,在其表面制备了具有优良润滑特性的多梯度类金刚石(DLC)复合涂层,通过有限元仿真分析结合摩擦学实验对Cr/WC/DLC/WC-DLC复合涂层性能进行考察.首先,利用ANSYS热固耦合模块对不同结构DLC涂层在沉积过程中的残余热应力进行了有限元热分析,以评估不同涂层结构下的应力分布;随后,采用洛氏压痕法对4种结构的DLC涂层结合强度进行了验证.最后,利用SEM、EDS、Raman光谱等表征手段,以及摩擦磨损试验机对涂层的摩擦学性能进行系统分析,重点考察干摩擦条件下多梯度DLC复合涂层的摩擦学性能.结 果 表 明,Cr/WC/DLC/WC-DLC复合涂层的残余热应力最小为227.94 MPa,结合强度最优达HF-1级,该结构在摩擦学性能方面表现出最低且稳定的摩擦系数.

To enhance the tribological performance of 20CrMnTi steel substrates,a multi-gradient diamond-like carbon(DLC)composite coating with excellent lubricating properties is fabricated on their surface.The performance of the Cr/WC/DLC/WC-DLC multilayer coating is investigated through a combination of finite element simulations and tribological experiments.First,a finite element thermal-stress analysis is conducted using the ANSYS thermo-mechanical coupling module to evaluate the residual thermal stresses generated during the deposition process in different DLC coating structures.Subsequently,Rockwell indentation tests are performed to assess the adhesion strength of four types of DLC coatings.Finally,the tribological performance of the coatings under dry sliding conditions is systematically analyzed using a tribometer,with surface characterization techniques including SEM,EDS,and Raman spectroscopy.The results indicate that the Cr/WC/DLC/WC-DLC composite coating exhibits the lowest residual thermal stress of 227.94 MPa and the highest adhesion strength,reaching HF-1 level.This multilayer structure also demonstrates the lowest and most stable coefficient of friction in terms of tribological performance.

陈雪辉;刘涛;高婷;刘伟;李昊

安徽建筑大学 机械与电气工程学院,安徽 合肥 230601||高端装备关键摩擦副安徽省重点实验室,安徽 合肥 230601安徽建筑大学 机械与电气工程学院,安徽 合肥 230601||高端装备关键摩擦副安徽省重点实验室,安徽 合肥 230601安徽建筑大学 机械与电气工程学院,安徽 合肥 230601||高端装备关键摩擦副安徽省重点实验室,安徽 合肥 230601安徽建筑大学 机械与电气工程学院,安徽 合肥 230601||高端装备关键摩擦副安徽省重点实验室,安徽 合肥 230601安徽建筑大学 机械与电气工程学院,安徽 合肥 230601||高端装备关键摩擦副安徽省重点实验室,安徽 合肥 230601

机械制造

DLC复合涂层有限元热分析结合强度摩擦学性能

DLC composite coatingfinite element thermal analysisbond strengthtribological properties

《四川轻化工大学学报(自然科学版)》 2026 (4)

40-50,11

安徽省高等学校自然科学重点研究项目(2022AH050257)安徽省高校杰出青年科研项目(2022AH020025)高端装备关键摩擦副安徽省重点实验室开放基金项目(LCFP-2403)合肥市自然科学基金项目(202317)安徽省市场监督管理局科技计划项目(2023MK033)

10.11863/j.suse.2026.04.04

评论