基于有限元结构参数提取的传递对准方法研究OA
Research on weapon delivery alignment method based on finite element structural parameter extraction
针对传递对准中动态变形建模不精确问题,提出一种基于有限元仿真的动态参数辨识方法.通过建立起竖架有限元模型,仿真起竖到位后的自由衰减振动,采用对数衰减法辨识系统固有频率与阻尼比.将辨识获得的物理参数融入扩展状态方程,替代传统经验参数的二阶马尔可夫模型.50 次蒙特卡洛仿真表明,本文方法使失准角收敛时间缩短 31.0%~53.6%,均方根误差降低 38.6%~44.2%,稳态误差降低 12.0%~55.1%.该方法无须增加硬件传感器,为传递对准提供了一种高精度、低成本的技术途径.
To address the issue of inaccurate dynamic deformation modeling in transfer alignment,a dynamic parameter i-dentification method based on finite element simulation is proposed.By establishing a finite element model of the erecting frame,the free damped vibration after the erection process is simulated,and the logarithmic decrement method is employed to identify the natural frequency and damping ratio of the system.The identified physical parameters are incorporated into the augmented state equation,replacing the traditional second-order Markov model with empirical parameters.Results from 50 Monte Carlo simulations demonstrate that the proposed method reduces the convergence time of misalignment angles by 31.0%to 53.6%,decreases the root mean square error by 38.6%to 44.2%,and reduces the steady-state error by 12.0%to 55.1%.Moreover,this method requires no additional hardware sensors,offering a high-precision,low-cost technical so-lution for transfer alignment.
夏铭禹;陈锋;吴琪
中国人民解放军 92942 部队,北京 100161中国人民解放军 92942 部队,北京 100161中国人民解放军 92942 部队,北京 100161
航空航天
传递对准有限元分析卡尔曼滤波
transfer alignmentfinite element analysisKalman filter
《指挥控制与仿真》 2026 (5)
86-92,7
评论