首页|期刊导航|林业科学|基于生长、材性、抗性及遗传结构分析的欧洲云杉无性系综合选择

基于生长、材性、抗性及遗传结构分析的欧洲云杉无性系综合选择OA

Comprehensive Selection of Picea abies Clones based on the Analysis of Growth,Wood Properties,Resistance,and Genetic Structure

中文摘要英文摘要

[目的]对甘肃小陇山欧洲云杉无性系群体的生长、材性和抗逆性状进行综合评价,并结合全基因组SNP 标记解析群体遗传结构、遗传多样性和性状遗传参数,为优良无性系筛选和核心育种群体构建提供依据.[方法]以 136个欧洲云杉无性系为材料,测定 15项生长、材性和抗逆性状;同时基于质控后的 31 285个高质量SNP 标记,开展群体结构、遗传多样性、遗传力和遗传值分析.在此基础上,结合表型变异、相关性分析、隶属函数法、主成分分析法与多性状综合指数法,对无性系进行多性状综合评价与筛选.[结果]1)欧洲云杉无性系群体存在一定遗传分层,在 K=2时可初步划分为 2个亚群,多数材料表现出混合祖先成分;群体遗传多样性参数显示,有效等位基因数(Ne)、观测杂合度(Ho)、期望杂合度(He)、Shannon-Wiener 多样性指数(I)和多态性信息含量(PIC)均表明该群体具有一定遗传变异,其中 Ho 低于 He,说明实际杂合水平低于理论期望.2)15个性状变异系数介于 8.31%~36.65%之间,树高(H)与胸径(DBH)相关性最高(r=0.85),淀粉与可溶性糖显著正相关,而与氮、磷显著负相关.不同性状遗传力差异明显,淀粉含量、磷含量、叶芽萌发等级(BS)和木材密度(Pilodyn)测定值遗传力较高,弹性模量(MOE)、叶片干质量(LDW)和胸径处于中等偏高水平,而树高、叶绿素含量(CC)和氮含量遗传力较低.3)基于 3种选择方法,在 10%入选率下,3种方法在生长与材性选择上高度一致,而抗逆性状因受环境和性状权衡影响,优良无性系交集较少.保留树高和胸径后,对其余 13个性状进行主成分分析,筛选出 7个关键指标,即 H、DBH、LDW、Pilodyn、MOE、CC 和 BS,其中除 H 和 CC 外,其余性状遗传力均达到中等及以上水平.基于7个关键性状综合评价,最终稳定遴选出 13个综合优良无性系.4)基于 7个关键性状可将群体划分为 3个类群,13个综合优良无性系主要集中于类群Ⅰ;同时,这些综合选优无性系在基于 SNP 的系统发育聚类树上分布于不同分支,说明其在保持改良潜力的同时覆盖了较广的遗传背景范围.[结论]欧洲云杉无性系群体虽整体分化程度有限,但仍具有一定遗传多样性和可利用遗传变异.基于表型评价与分子遗传参数相结合的多性状选择方法,能够兼顾生长、材性和抗逆性的协同改良,提高优良无性系筛选的稳定性与准确性,并为核心育种群体构建和后续亲本优化配置提供依据.

[Objective]A comprehensive evaluation was conducted on growth,wood property,and stress resistance traits of Picea abies clonal population in Xiaolongshan,Gansu Province.The genetic structure,genetic diversity,and trait genetic parameters of the population were characterized based on genome-wide SNP markers,thereby providing a basis for elite clone selection and core breeding population construction.[Method]A total of 136 P.abies clones were used as the experimental material to determine 15 growth,wood property and stress resistance traits.At the same time,31 285 high-quality SNP markers retained after quality control were used to analyze population structure,genetic diversity,heritability,and genomic estimated breeding values.On this basis,the phenotypic variation,trait correlations,membership function analysis,principal component analysis(PCA),and a multi-trait comprehensive index were further integrated to comprehensively evaluate and screen the multiple traits of the clones.[Result]1)The P.abies clonal population showed a certain degree of genetic stratification.At K=2,it could be preliminarily divided into two subgroups,with most clones exhibiting mixed ancestry.Population genetic diversity parameters,including effective allele number(Ne),observed heterozygosity(Ho),expected heterozygosity(He),Shannon-Wiener diversity index(I),and polymorphic information content(PIC),indicated that the population retained a certain level of genetic variation;however,Ho was lower than He,suggesting that the observed heterozygosity was lower than the expected level.2)The coefficients of variation for the 15 traits ranged from 8.31%to 36.65%.Tree height(H)was most strongly correlated with diameter at breast height(DBH)(r=0.85).Starch content was significantly positively correlated with soluble sugar content,but significantly negatively correlated with nitrogen and phosphorus contents.Heritability varied markedly among traits.Starch content,phosphorus content,budburst stage(BS),and wood density(Pilodyn value)showed relatively high heritability;modulus of elasticity,leaf dry weight(LDW),and DBH showed moderately high heritability;whereas H,chlorophyll content(CC),and nitrogen content showed relatively low heritability.3)Using three selection methods at a 10%selection intensity,the overlap of elite clones was relatively high for growth and wood property traits but low for stress resistance traits.After retaining H and DBH,PCA of the remaining 13 traits identified seven key indicators,namely H,DBH,LDW,Pilodyn,MOE,CC,and BS.Except for H and CC,all of these key traits showed moderate or higher heritability.4)Based on the comprehensive evaluation of these seven traits,13 elite clones with stable overall performance were identified.Furthermore,the population could be divided into three groups based on the seven key traits,with the 13 elite clones mainly clustered in Group I.These integratively selected elite clones were distributed across different branches of the SNP-based phylogenetic tree,indicating that they covered a relatively broad genetic background while maintaining breeding potential.[Conclusion]Although the P.abies clonal population showed limited overall genetic differentiation,it still retained a certain level of genetic diversity and exploitable genetic variation.The multi-trait selection strategy integrating phenotypic evaluation with molecular genetic parameters can facilitate the coordinated improvement of growth,wood property,and stress resistance,improve the stability and accuracy of elite clone selection,and provide a basis for core breeding population construction and subsequent parental optimization.

冷佳怡;杨晓伟;杨桂娟;王军辉;麻文俊;安三平;高本旺;王丽芳;张苗苗

北京林业大学林学院 北京 100083||森林培育经营国家林业和草原局重点实验室 中国林业科学研究院林业研究所 北京 100091森林培育经营国家林业和草原局重点实验室 中国林业科学研究院林业研究所 北京 100091||国家林业和草原局森林培育重点实验室 中南林业科技大学 长沙 410000森林培育经营国家林业和草原局重点实验室 中国林业科学研究院林业研究所 北京 100091森林培育经营国家林业和草原局重点实验室 中国林业科学研究院林业研究所 北京 100091森林培育经营国家林业和草原局重点实验室 中国林业科学研究院林业研究所 北京 100091甘肃省小陇山林业科学研究所甘肃省次生林培育重点实验室 天水 741022宜昌林业科学研究院 宜昌 443111甘肃省小陇山林业科学研究所甘肃省次生林培育重点实验室 天水 741022森林培育经营国家林业和草原局重点实验室 中国林业科学研究院林业研究所 北京 100091

农业科技

欧洲云杉无性系选择SNP标记遗传多样性多性状综合评价

Picea abiesclonal selectionSNP markersgenetic diversitymulti-trait comprehensive evaluation

《林业科学》 2026 (10)

125-140,16

"十四五"国家重点研发计划课题(2022YFD2200303).

10.11707/j.1001-7488.LYKX20260225

评论