棉籽油基支链化C22-三元酸聚酯多元醇的合成及制备聚氨酯泡沫OA
Synthesis of Cotton Seed Oil-based Branched C22-triaryl Acid Polyester Polyol and Its Application in Polyurethane Foam
以棉籽油酸(OA)为原料,通过 Alder-ene 反应与马来酸酐一步合成了支链 C22-三元酸(BTA-OA),随后与乙二醇(EG)、丙三醇(GI)和1,4-丁二醇(BDO)进行酯化反应,制得 3 种支链化 C22-三元酸聚酯多元醇,然后将其替代部分石油基聚醚多元醇4110,与二苯基甲烷二异氰酸酯(MDI)反应制备了一系列硬质聚氨酯泡沫,并对聚酯多元醇和聚氨酯泡沫的结构与性能进行分析.研究结果表明:BTA-OA 及其聚酯多元醇成功合成,且3 种聚酯多元醇的分子质量分布良好.加入支链化 C22-三元酸聚酯多元醇可显著提升聚氨酯泡沫的综合性能,与市售聚醚多元醇4110 制备的聚氨酯泡沫(PUF)相比,随着聚酯多元醇用量的增加,泡沫的压缩强度呈现先上升后下降的趋势,其中BTA-OA-GI 用量30%制备的聚氨酯泡沫(PUF-30%GI)的压缩强度最高,达214 kPa;BTA-OA-EG 用量 40%制备的聚氨酯泡沫(PUF-40%EG)的导热系数最低,为0.053 32 W/(m·K).与 PUF 相比,BTA-OA-BDO 用量 30%制备的聚氨酯泡沫(PUF-30%BDO)的初始热分解温度由268℃提高至301℃,提高了12.3%;PUF-30%GI 的残炭量(700℃)由15.29%提高至20.45%,提高了33.7%.
Using cottonseed oleic acid(OA)as the raw material,a branched C22-tricarboxylic acid(BTA-OA)was synthesized in a single-step reaction via the Alder-ene reaction with maleic anhydride(MA).This BTA-OA was then subjected to esterification reactions with butanediol(EG),glycerol(GI),and 1,4-butanediol(BDO)to yield three types of branched C22-tricarboxylic acid polyester polyols.These polyester polyols were used to partially replace the petroleum-based polyether polyol 4110 and were reacted with diphenylmethane diisocyanate(MDI)to prepare a series of rigid polyurethane foams;the structure and properties of both the polyester polyols and the polyurethane foams were subsequently analyzed.The results demonstrate the successful synthesis of BTA-OA and its corresponding polyester polyols,with the three polyester polyols exhibiting favorable molecular weight distributions.The incorporation of branched C22-tricarboxylic acid polyester polyols significantly enhances the overall performance of the polyurethane foams.Compared to polyurethane foam(PUF)prepared using the commercial polyether polyol 4110,as the amount of polyester polyol added increased,the compressive strength of the foams exhibited a trend of first increasing and then decreasing;among these,the polyurethane foam(PUF-30%GI)prepared using a 30%BTA-OA-GI blend exhibited the highest compressive strength,reaching 214 kPa;the polyurethane foam(PUF-40%EG)prepared using a 40%BTA-OA-EG blend exhibited the lowest thermal conductivity,at 0.053 32 W/(m·K).Compared to PUF,the initial thermal decomposition temperature of polyurethane foam(PUF-30%BDO)prepared with a BTA-OA-BDO content of 30%increased from 268℃to301℃,representing an improvement of 12.3%;the residual carbon content of PUF-30%BDO(at 700℃)increased from 15.29%to 20.45%,representing an improvement of 33.7%.
黄皈宁;闫一帆;钮腾飞;倪邦庆;桑欣欣
江南大学 化学与材料工程学院||合成与生物胶体教育部重点实验室,江苏 无锡 214122江南大学 化学与材料工程学院||合成与生物胶体教育部重点实验室,江苏 无锡 214122江南大学 化学与材料工程学院||合成与生物胶体教育部重点实验室,江苏 无锡 214122江南大学 化学与材料工程学院||合成与生物胶体教育部重点实验室,江苏 无锡 214122江南大学 化学与材料工程学院||合成与生物胶体教育部重点实验室,江苏 无锡 214122
化学化工
棉籽油聚酯多元醇聚氨酯泡沫压缩导热
cottonseed oilpolyester polyolpolyurethane foamcompressheat conduction
《生物质化学工程》 2026 (5)
19-28,10
国家自然科学基金资助项目(22578167)国家重点研发子课题(2024YFB4205904-02)
评论