首页|期刊导航|煤炭与化工|断层构造区超深孔聚能爆破弱化技术及应用

断层构造区超深孔聚能爆破弱化技术及应用OA

Weakening technology and application of ultra-deep hole energy-gathering blasting in fault structure area

中文摘要英文摘要

针对华苑煤业10号煤层过DF5断层期间坚硬岩层采煤机截割困难、推进效率受限的工程问题,本文提出深孔多向聚能爆破硬岩超前弱化技术,通过理论分析阐明定向致裂机理,并采用ANSYS/LS-DYNA动力学软件建立三维计算模型,通过数值模拟优化爆破参数,综合考量现场钻机装备条件、封孔工艺及打钻经济成本,最终确定单孔直径取94 mm、孔距取2.0 m交错布置,硬岩超前弱化效果较好,经现场试验结果表明,爆破后硬岩内部形成贯通裂隙,采煤机截齿磨损量降低40%以上,工作面整体推进效率提高30%以上,顶板稳定性保持较好.

Aiming at the engineering problems of difficult cutting and limited propulsion efficiency of shearer in hard rock stratum during the period of No.10 coal seam passing through DF5 fault in Huayuan Coal Industry,this paper puts forward the advanced weakening technology of hard rock in deep hole multi-directional energy-gathering blasting.Through theoretical analysis,the directional cracking mechanism is clarified,and the three-dimensional calculation model is established by using ANSYS/LS-DYNA dynamics software.The blasting parameters are optimized by numerical simulation,and the equipment conditions of field drilling rig,hole sealing process and drilling economic cost are comprehensively considered.Finally,it is determined that the single hole diameter is 94 mm and the hole spacing is 2.0 m staggered,and the advanced weakening effect of hard rock is better.The field test results show that after blasting,a penetrating crack is formed inside the hard rock,the wear of the shearer pick is reduced by more than 40%,the overall propulsion efficiency of the working face is increased by more than 30%,and the roof stability is maintained.

李健光;程志斌

山西灵石华苑煤业有限公司,山西晋中 031302河南理工产业技术研究院有限公司,河南焦作 454000

矿业与冶金

复杂构造区断层带深孔爆破聚能预裂数值模拟硬岩弱化

complex tectonic areafault zonedeep hole blastingshaped pre-crackingnumerical simulationhard rock weakening

《煤炭与化工》 2026 (9)

48-53,6

10.19286/j.cnki.cci.2026.09.008

评论