沙吉海矿三软煤层回采巷道冒顶隐患分级方法及应用OA
Classification method and application for roof fall hazards in gateways of three-soft coal seams of Shajihai Mine
针对三软煤层回采巷道支护针对性不足、安全与成本难以兼顾的问题,为保障巷道施工及长期服务安全,优化支护投入,本文基于稳定岩层识别技术与冒顶隐患分级体系,结合FLAC3D数值模拟,揭示不同级别顶板破坏规律,构建了以冒顶隐患分级为核心、风险防控为目标的锚杆(索)定量支护设计方法.推导了各级别冒顶隐患巷道的支护参数定量计算式,建立了三软煤层回采巷道支护设计量化参照标准,并将其应用于沙吉海煤矿B10煤层W05运输顺槽的支护工程.巷道围岩深部位移与表面位移的长期监测验证表明,该支护方案可有效抑制围岩变形,最大变形量控制在54mm以内,且变形快速趋于稳定,全面规避了冒顶及顶板失稳风险,验证了该设计方法的工程实用性与科学性.
Aimed at the problems of insufficient targeted support,and difficulty in balancing safety and cost in the mining roadway of three soft coal seams,to guarantee roadway construction and long term service safety and optimize support investment,support parameter quantitative calculation formulas for roadways with various roof fall hazard grades were derived in this paper.Based on stable rock stratum identification technology and roof fall hazard grading system,combined with FLAC3D numerical simulation,the failure laws of roofs at different grades were revealed.A quantitative bolt cable support design method centered on roof fall hazard grading and targeted at risk prevention control was constructed.A quantitative reference standard for support design of mining roadways in three soft coal seams was established,and it was applied to the support engineering of W05 transportation gateway in No.B10 coal seam of Shajihai Mine.Long term monitoring verifications of deep and surface displacements of roadway surrounding rock were conducted.It was demonstrated that surrounding rock deformation was effectively restrained by this support scheme,the maximum deformation was controlled within 54 mm,deformation rapidly tended to be stable,and risks of roof fall and roof instability were fully avoided.The engineering practicability and scientific nature of this design method were verified.
张庆丰
国网能源和丰煤电有限公司,新疆塔城 834406
矿业与冶金
巷道冒顶三软煤层隐患分级支护设计
roadway roof cavingthree-soft coal seamhidden trouble classificationsupport design
《煤炭与化工》 2026 (9)
37-42,6
评论