首页|期刊导航|煤炭与化工|直覆型厚硬顶板主控下沿空巷道灾变失稳演化规律及预控技术研究

直覆型厚硬顶板主控下沿空巷道灾变失稳演化规律及预控技术研究OA

Study on disaster instability evolution law and pre-control technology of gob-side roadways dominated by directly overlying thick hard roof

中文摘要英文摘要

针对深部开采中直覆型厚硬顶板条件下沿空巷道灾变失稳难题,本文以东滩煤矿63上06工作面为工程背景,综合采用现场实测、理论分析和数值模拟方法,系统研究了其失稳演化规律与预控技术.研究基于能量守恒原理,构建了以巷道接收能量与自身抗冲击能力对比为核心的冲击失稳能量判据,揭示了厚硬顶板破断动载的传递与致灾机制.应用该判据对实例进行分析,表明常规条件下顶板破断动载未超出巷道承载极限,验证了判据的有效性.通过建立FLAC3D数值模型,定量揭示了顶板赋存空间位置与几何特征的控制作用:顶板距离煤层越近、厚度越大,巷道围岩应力集中程度越高,变形响应越剧烈,且高应力影响范围更广、持续时间更长.基于上述机理,提出了以"深孔爆破断顶"为核心的主动防控技术体系.该技术通过切断顶板岩层连续性、缩短悬顶长度,从源头上降低静载储备并弱化动载释放强度,从而有效控制动静载叠加效应.现场工程实践表明,实施该技术后,巷道超前应力集中现象显著缓解,顶底板及两帮变形量得到有效控制,工作面实现了安全回采.本研究形成了一套从揭示灾变机理、建立风险判据到提出针对性防控技术的完整研究路径,为类似地质条件下沿空巷道的稳定性控制与冲击地压防治,提供了理论依据和实践参考.

Aiming at the catastrophic instability problem of gob-side roadways under the condition of directly overlying thick hard roofs in deep mining,No.63up06 Face of Dongtan Mine was taken as the engineering background in this study.Field measurement,theoretical analysis and numerical simulation methods were comprehensively adopted to systematically investigate the instability evolution law and pre-control technology of roadways.Based on the principle of energy conservation,an energy criterion for burst instability was established with the comparison between the energy received by roadways and their anti-burst capacity as the core index,and the transmission and disaster-causing mechanism of dynamic loads induced by the fracture of thick hard roofs were revealed.The case analysis was conducted by applying the proposed criterion,and the results demonstrated that the dynamic load caused by roof fracture did not exceed the bearing limit of roadways under conventional conditions,which verified the effectiveness of the established criterion.A FLAC3D numerical model was constructed to quantitatively reveal the controlling effects of the spatial occurrence position and geometric characteristics of roofs.It was indicated that a closer distance between the roof and coal seam and a larger roof thickness were associated with a higher stress concentration degree of roadway surrounding rock,a more intense deformation response,as well as a wider influence range and a longer duration of high stress.On the basis of the above mechanisms,an active prevention and control technology system centered on deep-hole blasting roof cutting was proposed.The continuity of roof strata was cut off and the suspended roof length was shortened by this technology,so that the static load reserve was reduced and the dynamic load release intensity was weakened from the source,and the superposition effect of static and dynamic loads was effectively controlled.Field engineering practices showed that the advance stress concentration of roadways was significantly alleviated,the deformations of the roof,floor and two ribs were effectively controlled,and safe mining of the working face was realized after the implementation of the proposed technology.A complete research framework covering disaster mechanism revelation,risk criterion establishment and targeted prevention technology proposal was formed in this study,which provided theoretical basis and practical references for the stability control of gob-side roadways and the prevention and control of rock bursts under similar geological conditions.

刘香兰

煤炭科学研究总院有限公司,北京 100013

矿业与冶金

直覆型厚硬顶板沿空巷道断顶控制冲击地压防治

directly overlying thick hard roofgob-side roadwaysroof cutting for controlrockburst prevention and control

《煤炭与化工》 2026 (9)

1-8,29,9

10.19286/j.cnki.cci.2026.09.001

评论