具有芯片寿命监测功能的直流控制保护装置设计方法OA
A self-sensing calibration-based method for monitoring chip aging signatures in DC control and protection device
芯片寿命直接影响直流控制保护装置的可靠运行,搭载热载流子注入效应可靠性监测电路的国产芯片尚处于研制初期,高温度敏感性成为其工程化应用的主要难点.传统外置温度传感器的补偿方案会增加系统复杂度与软件运行负担.为此,本文提出芯片自感知修正的老化监测方法,利用对老化不敏感的非退化环形振荡器与温度的强关联性构建温度模型,实时修正退化环形振荡器的输出参量,无需外部传感器即可实现芯片老化量的精准监测.经实验验证,该方法能有效消除温度干扰、显著提升监测精度,为国产可靠性监测芯片的工程应用提供了高集成、低成本的技术思路.
Chip lifespan directly affects the reliable operation of DC control and protection devices.Domestic chips equipped with hot carrier injection effect reliability monitoring circuits are still in the early stages of development,with their high temperature sensitivity posing a major challenge for engineering applications.Compensation schemes using external temperature sensors would increase system complexity and software overhead.To address this,this paper proposes a self-sensing calibration method for aging monitoring.It constructs a temperature model by leveraging the strong correlation between the aging-insensitive reference ring oscillator and temperature,enabling real-time correction of the output parameters of the aging-sensitive ring oscillator.This allows for precise monitoring of chip aging without the need for external sensors.Experimental results verify that this method effectively eliminates temperature interference and significantly improves monitoring accuracy,providing a high-integration,low-cost technical approach for the engineering application of domestic reliability monitoring chips.
刘洋;李宗萱;李哲;谢嘉琪;朱彦磊
许继电气股份有限公司,河南 许昌 461000许继电气股份有限公司,河南 许昌 461000许继电气股份有限公司,河南 许昌 461000许继电气股份有限公司,河南 许昌 461000许继电气股份有限公司,河南 许昌 461000
直流控制保护装置热载流子注入芯片可靠性监测国产芯片自感知修正退化环形振荡器
DC control and protection devicehot carrier injectionchip reliability monitoringdomestically produced chipsself-sensing calibrationaging-sensitive ring oscillator
《电气技术》 2026 (9)
34-40,49,8
评论