首页|期刊导航|China Foundry|Optimizing the connection mode between two diameter-varied conformal cooling channels in a selective laser melting-fabricated mold

Optimizing the connection mode between two diameter-varied conformal cooling channels in a selective laser melting-fabricated moldOA

中文摘要

The conformal cooling channels(CCCs)can improve the cooling efficiency of die casting molds,but improper designing might induce larger residual stress,especially for molds with diameter-varied CCCs.The effect of connection mode on the stress between two diameter-varied CCCs was studied by finite element analysis.The value and position of the maximum stress differ between the surface and the internal CCCs.For a fixed radius difference(a)of two diameter-varied CCCs,the increase of the length(b)of the transition region not only leads to the gradual decrease of the maximum stress,but also shifts the stress concentration position from the transition region between two diameter-varied CCCs to the parallel region with a smaller CCC diameter.Under the condition of a permanent wall thickness,the value of b should be at least twice of a value so as to avoid serious structural stress.The results of mechanical performance test for the 18Ni300 maraging steel,fabricated using selective laser melting method,verified the validity of simulation.Samples with the absolute value of a/b above 1/2 present brittle fracture behavior,otherwise possessing good tensile ductility.

Xin-yu Ning;Zhong-hui Cheng;Zhi-qun Liang;Tian-hao Chen;Bin Qian;Jian-rong Qiu;Sheng-zhi Sun;Bin-bin Liu

Institute of Light+X Science and Technology,Faculty of Electrical Engineering and Computer Science,Ningbo University,Ningbo 315211,Zhejiang,ChinaInstitute of Light+X Science and Technology,Faculty of Electrical Engineering and Computer Science,Ningbo University,Ningbo 315211,Zhejiang,ChinaInstitute of Light+X Science and Technology,Faculty of Electrical Engineering and Computer Science,Ningbo University,Ningbo 315211,Zhejiang,ChinaLaboratory of Infrared Materials and Devices,the Research Institute of Advanced Technologies,Ningbo University,Ningbo 315211,Zhejiang,ChinaNingbo Jiangxin Rapid Prototyping Technology Co.,Ltd.,Ningbo 315211,Zhejiang,ChinaState Key Laboratory of Modern Optical Instrumentation,School of Optical Science and Engineering,Zhejiang University,Hangzhou 310027,ChinaInstitute of Light+X Science and Technology,Faculty of Electrical Engineering and Computer Science,Ningbo University,Ningbo 315211,Zhejiang,ChinaState Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China

矿业与冶金

stressconformal cooling channelsfinite element analysisselective laser melting18Ni300

《China Foundry》 2026 (5)

P.711-717,7

fiancially supported by the National Key Research and Development Program of China(Grant No.2023YFE0200200)the National Natural Science Foundation of China(Grant Nos.52171096,U2141205,52371130,and 52301220)the“Pioneer and Leading Goose”R&D Program of Zhejiang Province(Grant No.2023C03089).

10.1007/s41230-025-4190-2

评论