首页|期刊导航|China Foundry|Effect of Al-8Sr-8Ce master-alloy content on microstructure and mechanical properties of Al-15Mg_(2)Si alloy

Effect of Al-8Sr-8Ce master-alloy content on microstructure and mechanical properties of Al-15Mg_(2)Si alloyOA

中文摘要

Al-Mg_(2)Si alloys exhibit broad application prospects in automotive,aerospace,and electronics fields.However,the coarse morphology of Mg_(2)Si constrains their applications.In this study,an Al-8Sr-8Ce modifier was proposed to improve the Mg_(2)Si morphology and mechanical properties of Al-15Mg_(2)Si alloys.The experimental results show that the addition of Al-8Sr-8Ce modifier transforms coarse,irregular flaky primary Mg_(2)Si phases into fine polygonal grains and refines the coarse Chinese-script-like eutectic Mg_(2)Si phases into fine fibrous structures.As the addition of Al-8Sr-8Ce increases from 0 to 0.4wt.%,both primary and eutectic Mg_(2)Si phases are gradually refined with enhanced distribution uniformity.When the Al-8Sr-8Ce content further increases to 0.5wt.%,the average size of primary Mg_(2)Si phase increases nearly by 100%compared to that with 0.4wt.%modifier,and the eutectic Mg_(2)Si transforms into a thin-sheet interconnected dendritic structure.Therefore,the optimal content of Al-8Sr-8Ce is 0.4wt.%.Under this condition,the average diameter of the primary Mg_(2)Si phase decreases to 11.95μm,and the ultimate tensile strength and elongation attain 184 MPa and 4.0%respectively,which are 7.6%and 60.0%higher than those of the unmodified alloy.Excessive addition of the Al-8Sr-8Ce induces massive precipitation of Al_(2)Si_(2)Sr with a high formation temperature,which consume Sr and Ce elements and weaken the poison adsorption effect.This results in a decrease in both the strength and ductility of the alloy.

Xiao-dong Gao;Dong-fu Song;Zhi-bo Zhang;Yue-hua Cai;Tao-tao Luo;Bo Yuan;Xiao-feng Guo;Shi-an Zhu

Guangdong Provincial Key Laboratory of Metal Toughening Technology and Application,Institute of New Materials Guangdong Academy of Sciences,Guangzhou 510650,China Guangdong Haomei New Material Co.,Ltd.,Qingyuan 511500,Guangdong,China Inner Mongolia University of Science and Technology,Baotou 014000,Inner Mongolia,ChinaGuangdong Provincial Key Laboratory of Metal Toughening Technology and Application,Institute of New Materials Guangdong Academy of Sciences,Guangzhou 510650,China Guangdong Haomei New Material Co.,Ltd.,Qingyuan 511500,Guangdong,ChinaGuangdong Provincial Key Laboratory of Metal Toughening Technology and Application,Institute of New Materials Guangdong Academy of Sciences,Guangzhou 510650,ChinaGuangdong Haomei New Material Co.,Ltd.,Qingyuan 511500,Guangdong,ChinaGuangdong Haomei New Material Co.,Ltd.,Qingyuan 511500,Guangdong,ChinaInner Mongolia University of Science and Technology,Baotou 014000,Inner Mongolia,ChinaInner Mongolia University of Science and Technology,Baotou 014000,Inner Mongolia,ChinaGuangdong Haomei New Material Co.,Ltd.,Qingyuan 511500,Guangdong,China

矿业与冶金

Al-15Mg_(2)Si alloyAl-8Sr-8Ce modificationprimary Mg_(2)Si phaseeutectic Mg_(2)Simechanical properties

《China Foundry》 2026 (5)

P.737-745,9

National Key R&D Projects of China(No.2024YEE0109100)the Science and Technology Plan Project of Guangdong Province(2023B121260043)the Science and Technology Plan Projects of Qingyuan City(No.2024YFJH001)the Scientific Research Foundation for the First-Class Discipline of Educational Committee of Inner Mongolia(YLXKZXNKD-0038)for financial support.

10.1007/s41230-026-5192-4

评论