首页|期刊导航|Journal of Advanced Ceramics|Defect regulation and photodarkening suppression in Yb:Y_(2)O_(3) laser ceramics through charge-compensated Zr–Ca co-doping strategy

Defect regulation and photodarkening suppression in Yb:Y_(2)O_(3) laser ceramics through charge-compensated Zr–Ca co-doping strategyOA

中文摘要

Sesquioxide ceramics are promising candidates for high-power laser applications,yet achieving high optical quality remains challenging.This is primarily due to rapid grain-boundary mobility during the final stage of sintering and pump-induced photodarkening under high-power excitation,particularly when traditional tetravalent sintering additives(e.g.,ZrO_(2))are used.Here,approximately 1:1(molar)Zr^(4+)–Ca^(2+)codoping is introduced to regulate the sintering behaviors of Yb:Y_(2)O_(3) ceramics,yielding dense microstructures with uniform elemental distributions.The charge compensation enabled by Zr–Ca codoping suppresses the formation of point defects,thereby significantly mitigating photodarkening.As a result,the optimized 0.02 at%Zr–Ca codoped sample delivers a maximum continuous-wave(CW)output power of 20.5 W at 1076 nm with a slope efficiency of 65.4%.These results demonstrate that Zr–Ca codoping is an effective strategy for fabricating high-performance sesquioxide laser ceramics with improved optical quality and enhanced resistance to pump-induced photodarkening.

Qing Li;Dongliang Xing;Jun Wang;Fengkai Ma;Jie Ma;Peng Liu;Fei Liang;Jian Zhang;Haohai Yu;Huaijin Zhang;Dingyuan Tang

State Key Laboratory of Crystal Materials and Institute of Crystal Materials,Shandong University,Jinan 250100,ChinaJiangsu Key Laboratory of Advanced Laser Materials and Devices,School of Physics and Electronic Engineering,Jiangsu Normal University,Xuzhou 221116,ChinaJiangsu Key Laboratory of Advanced Laser Materials and Devices,School of Physics and Electronic Engineering,Jiangsu Normal University,Xuzhou 221116,ChinaGuangdong Provincial Engineering Research Center of Crystal and Laser Technology,Department of Optoelectronic Engineering,Jinan University,Guangzhou 510632,ChinaJiangsu Key Laboratory of Advanced Laser Materials and Devices,School of Physics and Electronic Engineering,Jiangsu Normal University,Xuzhou 221116,ChinaJiangsu Key Laboratory of Advanced Laser Materials and Devices,School of Physics and Electronic Engineering,Jiangsu Normal University,Xuzhou 221116,ChinaState Key Laboratory of Crystal Materials and Institute of Crystal Materials,Shandong University,Jinan 250100,ChinaShanghai Institute of Ceramics,Chinese Academy of Sciences,Shanghai 201899,ChinaState Key Laboratory of Crystal Materials and Institute of Crystal Materials,Shandong University,Jinan 250100,ChinaState Key Laboratory of Crystal Materials and Institute of Crystal Materials,Shandong University,Jinan 250100,ChinaFuture Technology School,Shenzhen Technology University,Shenzhen 518118,China

化学化工

sesquioxide ceramicsZr–Ca codopingsintering behaviorpoint defectslaser performance

《Journal of Advanced Ceramics》 2026 (6)

P.215-225,11

supported by the National Natural Science Foundation of China(Nos.62475108,62105130,62475104,and 52422201)the National Key R&D Program of China(No.2022YFB3605801)the National Science Foundation of Top Talent of SZTU(No.GDRC202302)the Cui Can Program of Guangdong Province(No.202402BJ0602)the Jinan University Fundamental Research Funds for the Central Universities(No.21624407)the Open Fund of the Guangdong Provincial Key Laboratory of Rare Earth Development and Application(No.XTKY-202402).

10.26599/JAC.2026.9221312

评论