首页|期刊导航|Journal of Magnesium and Alloys|Elucidating the morphology difference of intermetallic compounds in Mg-to-Al weld nugget zone via multiphase-field simulation

Elucidating the morphology difference of intermetallic compounds in Mg-to-Al weld nugget zone via multiphase-field simulationOA

中文摘要

Friction stir welding(FSW)of dissimilar Mg/Al alloys enables lightweight hybrid structures,yet joint performance is strongly governed by the thickness and morphology of intermetallic compounds(IMCs)formed in the weld nugget zone(WNZ).The coupling between dynamic recrystallization(DRX)and IMCs nucleation/growth is quantified using experimental characterization and a multiphase-field model.The results reveal an Al-based supersaturated solid solution at the Al/Al_(3)Mg_(2) interface,providing sufficient driving force for Al_(3)Mg_(2) nucleation,whereas the driving force for Al_(12)Mg_(17) nucleation at the Mg/Al_(12)Mg_(17) interface is much smaller,leading to equiaxed Al_(3)Mg_(2) but predominantly columnar Al_(12)Mg_(17).The observed morphological difference arises from the combined effects of the disparate diffusion rates of Al and Mg atoms and the distinct composition ranges of the two IMCs on the phase diagram.Compared with the bottom region,the mid-WNZ experiences stronger DRX,generating more grain-boundary nucleation sites.Incorporating DRX also delays vacancy-mediated diffusion such that the peak diffusion period becomes synchronized with the most intense DRX stage,promoting the formation of new IMC layers.Consequently,the peak diffusion coefficient increases at the mid-WNZ but decreases at the bottom region.Owing to the higher temperature in mid-WNZ and enhanced nucleation kinetics,equiaxed IMCs are more likely to form there.This work provides a mechanistic basis for tailoring IMC thickness and morphology in dissimilar Mg/Al FSW.

Fengyuan Zhao;Jinqiang Gao;ChuanSong Wu;Lei Shi

MOE Key Lab for Liquid-Solid Structure Evolution and Materials Processing,Institute of Materials Joining,Shandong University,Jinan,250061,ChinaMOE Key Lab for Liquid-Solid Structure Evolution and Materials Processing,Institute of Materials Joining,Shandong University,Jinan,250061,ChinaMOE Key Lab for Liquid-Solid Structure Evolution and Materials Processing,Institute of Materials Joining,Shandong University,Jinan,250061,ChinaMOE Key Lab for Liquid-Solid Structure Evolution and Materials Processing,Institute of Materials Joining,Shandong University,Jinan,250061,China

矿业与冶金

Intermetallic compoundsMorphologyDynamic recrystallizationFriction stir weldingMultiphase-field simulation

《Journal of Magnesium and Alloys》 2026 (8)

P.224-256,33

the financial support from the National Natural Science Foundation of China(Grant No 52035005).

10.1016/j.jma.2026.102091

评论