Mechanical properties and deformation mechanisms of a dual-phase Mg-Sc alloy:Effects of strain rate and temperatureOA
The compressive mechanical behavior and deformation mechanisms of a dual-phase Mg-Sc alloy consisting of hexagonal close-packed(HCP)and body-centered cubic(BCC)phases are systematically investigated over a wide temperature range(133-473 K)at two representative strain rates(0.001 and 3000 s^(-1)).The mechanical response strongly depends on both deformation temperature and strain rate.An excellent strength-ductility synergy is achieved at 133 K and 3000 s^(-1),with a yield strength of 364 MPa and a fracture strain of 32%.Microstructural analyses reveal that twinning in the HCP phase is significantly suppressed at 298 K and 0.001 s^(-1) due to the relatively high Sc content.Decreasing temperature and increasing strain rate both promote twinning activity,with strain rate playing a more pronounced role.At 133 K and 3000 s^(-1),{1121}and{1012}twins dominate,accompanied by{1011}twin and secondary twins such as{1121}-{11¯21}and{1011}-{1012}.Plastic deformation in the BCC phase is mainly governed by dislocation slip,and only a small amount of deformation-induced HCP martensite is observed.These results provide novel insight into the temperature-and strain-rate-dependent deformation mechanisms in dual-phase Mg-Sc alloys.
F.W.Pi;L.H.He;X.J.Zhao;Y.J.Deng;P.P.Shi;Y.Cai;C.J.Yan;S.N.Luo
Key Laboratory of Advanced Technologies of Materials,Ministry of Education,and Dynamic Materials Data Science Center,Southwest Jiaotong University,Chengdu,Sichuan,ChinaKey Laboratory of Advanced Technologies of Materials,Ministry of Education,and Dynamic Materials Data Science Center,Southwest Jiaotong University,Chengdu,Sichuan,ChinaKey Laboratory of Advanced Technologies of Materials,Ministry of Education,and Dynamic Materials Data Science Center,Southwest Jiaotong University,Chengdu,Sichuan,ChinaThe Peac Institute of Multiscale Sciences,Chengdu,China Extreme Material Dynamics Technology Laboratory,Chengdu,Sichuan,ChinaNingbo Institute of Materials Technology and Engineering,CAS,Ningbo,Zhejiang,ChinaThe Peac Institute of Multiscale Sciences,Chengdu,China Extreme Material Dynamics Technology Laboratory,Chengdu,Sichuan,ChinaInstitute of Corrosion Science and Technology,Guangzhou,ChinaKey Laboratory of Advanced Technologies of Materials,Ministry of Education,and Dynamic Materials Data Science Center,Southwest Jiaotong University,Chengdu,Sichuan,China
矿业与冶金
Dual-phase Mg alloyDynamic deformationMechanical propertiesTwinningMartensitic transformation
《Journal of Magnesium and Alloys》 2026 (8)
P.535-545,11
sponsored in part by the Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang(Grant no.2024R01004)Sichuan Science and Technology Program(2025ZNSFSC1343)Guangdong Basic and Applied Basic Research Foundation(2025A1515010368)National Foreign Expert Project of the Ministry of Science and Technology(H20240065).
评论