首页|期刊导航|Journal of Magnesium and Alloys|Effect of Al_(2)Y phase on microstructure and deformation behavior of Mg-Al-Y Alloys:Insights from FIB-DIC technique

Effect of Al_(2)Y phase on microstructure and deformation behavior of Mg-Al-Y Alloys:Insights from FIB-DIC techniqueOA

中文摘要

In the present work,four Mg-3Al-5Y,Mg-6Al-11Y,Mg-9Al-17Y,and Mg-11Al-21Y(wt.%)alloys,with different volume fractions of Al_(2)Y phase,were fabricated by mechanical stirring casting and hot extrusion.The effect of Al_(2)Y phase on the microstructure and deformation behavior of Mg-Al-Y alloys was investigated using the focused ion beam-digital image correlation(FIB-DIC)technique.The results show that as the volume fraction of the Al_(2)Y phase increases,the strength of the Mg-Al-Y alloys continuously improves,which is primarily attributed to the coefficient of thermal expansion(CTE)strengthening mechanism.The Young’s modulus also increases,owing to the high modulus of the Al_(2)Y phase,and the increase in modulus is more consistent with the prediction of the Reuss model.Notably,the Mg-9Al-17Y alloy achieves an optimal combination of yield strength(202.4 MPa),Young’s modulus(51.5 GPa),and ductility(7%).The FIB-DIC technique highlights strain concentration at the Al_(2)Y/Mg matrix interfaces and grain boundaries,where strain compatibility is influenced by adjacent grain orientations and phase interfaces mismatch.Additionally,the size,dispersion,and distribution of Al_(2)Y phases play a crucial role in strain accommodation.This study provides valuable insights for the design of high-performance magnesium alloys with enhanced mechanical properties.

Zhiyuan Liu;Tianyou Wang;Li Jin;Jian Zeng;Shuai Dong;Fenghua Wang;Fulin Wang;Jie Dong

National Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composite,School of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,ChinaNational Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composite,School of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,ChinaNational Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composite,School of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,ChinaNational Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composite,School of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,ChinaNational Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composite,School of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,ChinaNational Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composite,School of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,ChinaNational Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composite,School of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,ChinaNational Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composite,School of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,China

矿业与冶金

Al_(2)Y phaseMg-Al-Y alloysFIB-DIC techniqueStrain concentration

《Journal of Magnesium and Alloys》 2026 (8)

P.585-597,13

gratefully acknowledge the financial supports of the National Natural Science Foundation of China(Grant No.U2241231,No.52071206).

10.1016/j.jma.2025.07.004

评论