首页|期刊导航|Advances in Aerodynamics|Solving three-dimensional moving ablation interfaces between gas flow and porous thermal protection materials using a hybrid micro-continuum scale approach

Solving three-dimensional moving ablation interfaces between gas flow and porous thermal protection materials using a hybrid micro-continuum scale approachOA

中文摘要

Structural evolution of the porous surface caused by aerodynamic heating and ablation is crucial for evaluating the ablative performance of light-weight thermal protection materials for high speed vehicles. However, the numerical coupling prediction method of the flow, heat transfer, thermochemical reactions and the pore-scale structure evolution still remains limited. In this study, a hybrid micro-continuum scale approach is employed to predict this complicated coupling phenomenon for threedimensional(3D) porous media. The results indicate that in the simulation of the oxidation ablation process of a typical carbon fibrous porous medium, the proposed method can successfully reproduce the needle-like morphology observed experimentally, revealing the gradual recession and surface roughness formation caused by surface heterogeneity. Moreover, under high-temperature flow conditions where the reaction rate is much larger than the mass-transfer rate due to convection and diffusion, the incoming oxygen gas can be consumed rapidly at the flow/porous media interface. This fast consumption is found to be dominant, resulting in a low oxygen supply condition at the gas–solid interface and a non-linear ablation recession rate. The recession rate is found to reach its maximum value of 13.05 μm/s, followed by a gradual decline to 8.35 μm/s. The proposed hybrid micro-continuum multiscale modeling approach can potentially offer valuable pore-scale insights into the ablation behavior of porous media, thereby enhancing the predictive accuracy for thermal protection systems.

Jinyue Zhang;Jin Zhao;Guice Yao;Dongsheng Wen

School of Aeronautic Science and Engineering,Beihang University,Beijing 100191,China Institute of Thermodynamics,Technical University of Munich Munich 80333,GermanySchool of Aeronautic Science and Engineering,Beihang University,Beijing 100191,ChinaSchool of Aeronautic Science and Engineering,Beihang University,Beijing 100191,China School of General Engineering/Sino-French Engineer School,Beihang University,Beijing 100191,ChinaSchool of Aeronautic Science and Engineering,Beihang University,Beijing 100191,China School of General Engineering/Sino-French Engineer School,Beihang University,Beijing 100191,China Institute of Thermodynamics,Technical University of Munich Munich 80333,Germany

航空航天

Micro-continuum scale methodFibrous preformAblation evolutionOxygen gasGas-solid interface

《Advances in Aerodynamics》 2026 (2)

P.163-179,17

supported by the National Natural Science Foundation of China (No. 52206067)the NSFC-DFG Mobility Programme (No. M-0368)the 111 Center (B18002)。

10.1186/s42774-026-00257-4

评论