Cr/Zr微合金化调控铸造Al-Cu-Mg-Si合金点蚀倾向性研究OA
Study on Pitting Tendency Control of Cast Al-Cu-Mg-Si Alloy by Cr/Zr Microalloying
Al-Cu-Mg-Si是常用的高强铸造铝合金系列,然而含Cu相的存在会导致其在含Cl-环境中发生严重点蚀,极大限制了其应用范围.本文通过扫描电子显微镜观察腐蚀形貌,结合电化学分析,研究了铸造Al-5.6Cu-0.3Mg-0.3Si合金中点蚀的萌生与扩展行为,并通过添加Cr/Zr元素实现合金点蚀倾向性的抑制.结果表明,点蚀萌生于含Cu相,并沿晶界扩展;点蚀尺寸与含铜相分布密切相关,Cr/Zr添加通过晶粒细化显著减小晶界处含铜相尺寸,从而降低点蚀规模.相较于基础合金,Cr/Zr添加使表面钝化膜等效厚度分别增加了 112%和171%,电荷转移电阻大幅提升,二者共同实现界面电化学反应的抑制进而降低点蚀倾向性.与基础合金相比,0.2%(质量分数)Zr的添加使腐蚀电流密度、最大点蚀深度和点蚀面积分别降低了 68.7%、48.0%和74.8%.
Al-Cu-Mg-Si is a commonly used high-strength cast aluminium alloy series;however,the presence of Cu-containing phases causes severe pitting in chloride-containing environments,which significantly limits its application potential.In the present work,the initiation and propagation of pitting in cast Al-5.6Cu-0.3Mg-0.3Si alloys were systematically analysed by observing corrosion morphologies via SEM combined with electrochemical analysis.The development of a high-pit resistance alloy was achieved by the addition of Cr or Zr.The results indicate that the initiation of pitting occurs at Cu-containing phases and that the propagation of pitting occurs along grain boundaries.The size of pitting is correlated with the distribution of Cu-containing phases,and the addition of Cr or Zr significantly reduces the size of Cu-containing phases present at grain boundaries by grain refinement,thereby reducing the size of pitting.Compared with the base alloy,the addition of Cr or Zr increaseds the equivalent thickness of the passive films by 112%and 171%,respectively,and the substantial increase in charge transfer resistance is the primary factor in inhibiting interfacial electrochemical reactions.The alloy with 0.2 wt.%Zr addition exhibiteds decreases in the corrosion current density,maximum pitting depth and pitting area of 68.7%,48.0%and 74.8%,respectively.
孙岚曦;袁祥耀;王瑞;钟纪康;王东涛;长海博文
苏州大学高性能金属结构材料研究院,江苏苏州 215000||苏州大学金属材料与先进制造学院,江苏苏州 215000苏州大学高性能金属结构材料研究院,江苏苏州 215000||苏州大学金属材料与先进制造学院,江苏苏州 215000苏州大学高性能金属结构材料研究院,江苏苏州 215000||苏州大学金属材料与先进制造学院,江苏苏州 215000苏州大学高性能金属结构材料研究院,江苏苏州 215000||辽宁工业大学材料科学与工程学院,辽宁锦州 121001苏州大学高性能金属结构材料研究院,江苏苏州 215000||苏州大学金属材料与先进制造学院,江苏苏州 215000苏州大学高性能金属结构材料研究院,江苏苏州 215000||苏州大学金属材料与先进制造学院,江苏苏州 215000
矿业与冶金
微合金化点蚀抗性电化学分析Al-Cu-Mg-Si合金
microalloyingpitting resistanceelectrochemical analysisAl-Cu-Mg-Si alloy
《铸造技术》 2026 (8)
903-911,9
评论